Dixon 18124-0804 manual Belts, Belt Tension, Care And Maintenance, Mower Deck Serpentine Belt

CARE AND MAINTENANCE

BELTS:

Check belts every 50 hours. Replace any belts found to be in poor condition.

BELT TENSION:

Mower Deck Serpentine Belt:	P/N 1300
Manual adjustment. Refer to illustrationfor
adjustment procedure.
Engine to Mower Deck Belt:	P/N 6111

The engine to mower deck drive belts are automatically

held in proper tension by springs which push the deck assembly forward and do not require any additional adjustment to be made.

Idler Weldment		Idler Shock Mount
	“L” Rod	Hex Nut

3/4” (42”/44”/50” Serpentine)

Tighten or Loosen Hex Nut to achieve this dimension

Note: Belt deflection or movement should be approximately 1/4” when measured at mid-point between pulleys. Periodically inspect both belt and idler systems.

37