OPERATION INSTRUCTIONS

MOWING WITH A MULCHING ATTACHMENT:

Mulching or recycling the grass clippings requires a totally different mowing approach than would be normal when side discharging or bagging the grass. There may be instances or conditions where it is not possible to hide all of the recycled or mulched clippings.

In order to achieve the best results, please read and follow the mulching tips listed below:

1.Set the engine speed control to the wide open or full setting.

2.Place the mower deck cut height selector in either the top or second notch. Never cut more than 3/4" to 1" off the grass at any one time. Attempting to cut more grass will result in the deck plugging and cause the engine to stall.

3.It may be necessary to cut the lawn twice to achieve acceptable mulching performance especially on first cuttings or if the lawn is heavily fertilized.

4.Do Not Attempt To Cut Grass When It Is Wet. Mulching performance will be very poor under wet grass conditions.

5.Maintain Sharp Blades Throughout The Cutting Season. This is very important. Optimal mulching performance cannot be obtained with dull or nicked up blades.

6.Keep The Underside Of The Mower Deck Clean. Remove all grass and dirt buildup from the underside of the pan, the baffles and deflectors after each use.

7.Alternate mower direction. This will evenly disperse the mulched grass clippings over the lawn for even fertilization.

If the mulching quality of the mower does not seem to be satisfactory, try one or more of the following tips:

1.Raise the height-of-cut setting on your mower.

2.It may be necessary to cut your grass more frequently.

3.Operate the mower at a slower ground speed.

4.Overlap cutting swaths instead of cutting a full swath with each pass.

5.Mow across the marginal areas a second time.

6.CUT HIGH - MOW OFTEN!

Page 20

Page 19 Page 21
Page 20
Image 20
Dixon 1856-0599 manual Mowing with a Mulching Attachment, CUT High MOW Often
Page 19 Page 21

1856-0599 specifications

Dixon 1856-0599 is a remarkable example of technological evolution in the realm of precision engineering and design. This model, originally manufactured in the mid-19th century, reflects the advanced capabilities of its time, combining innovative technology with exceptional craftsmanship to create a product that has endured through decades.

One of the main features of Dixon 1856-0599 is its robust construction. Designed to withstand the rigors of daily use, the model employs high-quality materials that were carefully selected to enhance durability. The use of cast iron and steel components not only provides strength but also ensures longevity, making it a reliable choice for professionals and hobbyists alike.

The technologies integrated into the Dixon 1856-0599 are noteworthy, particularly its precision engineering. The model incorporates advanced machining processes that were groundbreaking at the time of its production. Features such as fine-tuning mechanisms and accurate calibration ensure that users can achieve precise results, which is crucial for tasks requiring attention to detail.

The characteristics of the Dixon 1856-0599 further cement its place in the annals of engineering history. One defining trait is its user-friendly design, which allows for ease of operation. The ergonomic handling and intuitive controls make it accessible to individuals with varying levels of expertise, from seasoned professionals to newcomers learning the craft.

Moreover, the Dixon 1856-0599 boasts adaptability. Its design allows for an array of attachments, enabling users to modify the tool for specific tasks. This versatility has rendered it a valuable asset across multiple fields, including mechanical engineering, woodworking, and even artistic endeavors.

In conclusion, the Dixon 1856-0599 stands as a testament to the ingenuity of its creators and the enduring nature of well-designed technology. With its resilient build, advanced machining techniques, user-centered features, and adaptability, it remains a significant artifact reflecting the innovation of its time. Its legacy endures, inspiring modern designs while serving as a reminder of the importance of durability and precision in engineering. Through the years, Dixon 1856-0599 has maintained its status as a reliable tool, trusted by many and appreciated by enthusiasts who value its rich history and timeless functionality.
Top Page Image Contents