Dixon 1857-0599 manual Specifications, Models ZTR 4515B and 4516K

SPECIFICATIONS

Models ZTR 4515B and 4516K

CHASSIS:	Twin 12 gauge side frames and 7 gauge transmission and engine base plate.
BODY:	All body parts are made of high density polyethylene. Dent and corrosion resistant.
	Front body contains access panel for battery service.
MOWER DECKS:	42" Deck:	13 GA Stamped Steel Construction - 42" Cut Width
	50" Deck	11 GA Fabricated Construction/Reinforcement Ribs - 50" Cut Width
	Cut height approximately 1" to 4" via 7 position lift handle.
BLADE DRIVE:	Electric clutch.
TRANSMISSION:	Each rear wheel is independently driven by a HydroGear IZT hydrostatic drive.
ENGINE:
Model 4515B:	15.5 HP Vanguard Briggs & Stratton, 4-Cycle, Single Cylinder, Overhead Valve,
	Air-Cooled, Gasoline, Vertical Shaft With Cast Iron Cylinder Sleeve, Oil Pump
	With Integral Oil Filter.
Model 4516K:	16 HP Kohler Command 16, 4-Cycle, Single Cylinder, Overhead Valve, Air-
	Cooled, Gasoline, Pressure Lubricated, With Oil Filter, Vertical Shaft, Aluminum
	Head and Block with Cast-Iron Cylinder Liner. Smart Spark Ignition.
STARTING SYSTEM:	Electric by key switch operation with safety interlock blade drive.
TIRES:	Front	11 X 4.00 X 5 ribbed tread.
	Rear	18 X 8.50 X 8 Multi-Trac
RECOMMENDED
TIRE PRESSURE:	Front	16-21 lbs.
	Rear	8-14 lbs.
CAPACITIES:	Fuel	2.7 gallons total.
	Engine	Briggs & Stratton - 1.50 quarts oil.
		Kohler - 2 quarts oil with filter.
DIMENSIONS:	Width	44" Maximum Track Width
	Height	42" to top edge of seat.
	Length	72" hitch tab to front bumper.
	Weight	Power Unit:	463 lbs.
		w/42" Deck:	547 lbs.
		w/50" Deck:	603 lbs.
NOTE:	Additionalinformationprovidedinserviceinstructionsundertheindividualcomponent.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Page 11