Dixon 2004 ZEETER 36”, S P E C I F I C A T I O N S, 50.5” overall width of deck with deflector

	S P E C I F I C A T I O N S
	ZEETER 36”
CHASSIS:	11 gauge welded channel frame
BODY:	All body parts made of rotational molded polyethylene.
	Front body contains access panel for battery service.
	Seat tilts forward to allow transmission service.
MOWER DECK:	11 GA laser cut fabricated. 36” cut width. Cut height
	approximately 1-1/2”- 4” via 7-position lift handle.
BLADE DRIVE:	Electric clutch
TRANSMISSION:	Each rear wheel is independently driven by chain and
	sprockets through a friction mechanical drive.
ENGINE:	11 HP Briggs & Stratton Powerbuilt, 4-cycle, single
	cylinder, air-cooled, gasoline, vertical shaft, aluminum
	head and block.

STARTING SYSTEM: Electric by key switch operation with safety interlocks

	on parking brake and blade drive.
TIRES:	Front	9 x 3.50-4 Turf Saver
	Rear	16 x 6.50-8 Turf Saver
RECOMMENDED	Front	16-21 PSI
TIRE PRESSURE:	Rear	8-14 PSI
CAPACITIES:	Fuel	3 quart
	Engine	1.25 quarts oil
DIMENSIONS:	Width	35” outside rear wheel measurement
	Width	50.5” overall width of deck with deflector
	Height	31” to top edge of seat
	Length	65.5” hitch tab to front
	Weight	427 lbs.

Additional information provided in service instructions under the individual component.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

15