CARE AND MAINTENANCE

MOWER DECK LEVELING PROCEDURE:

There are a total of (4) threaded adjusters which will control the attitude or pitch of the mower deck. The adjusters have locknuts on the bottom which can be turned up or down to raise or lower the front and rear of the mower deck. Deck should be level or pitched slightly higher in rear.

A.Place the mower on a smooth level surface with front casters positioned t owards deck. Check tire pressures to insure the mower has a correct stance. Inflate tires as required:

Front

16 - 21 lbs maximum

Rear:

8-14 lbs maximum

NOTE: To insure accuracy of leveling procedure, mower deck drive belt must be installed prior to leveling deck.

B.Wear heavy gloves. Turn each outer blade tip to align with the deck or in a side-to-side manner.

C.Measure from the floor surface up to the bottom of the blade tip on the discharge side of the mower deck. Retain this measurement. Move to the opposite side, check that measurement is the same. If adjustment is required, turn the nut on the bottom of the front threaded adjuster up or down until both side-to-side measurements are equal. Retain measurement.

44

Page 43 Page 45
Page 44
Image 44
Dixon 2006 manual Mower Deck Leveling Procedure
Page 43 Page 45

2006 specifications

Dixon 2006 represents a significant milestone in the evolution of personal computing, specifically focusing on the integration of advanced features and technologies that defined a new era for users. Developed during a time of rapid technological advancement, Dixon 2006 brought a host of characteristics that catered to the growing demands of consumers.

One of the standout features of Dixon 2006 was its emphasis on portability. Incorporating a lightweight design, it enabled users to easily carry their devices without compromising on performance. This focus on mobility was crucial as it aligned with the increasing trend towards remote work and on-the-go computing. The form factor of Dixon 2006 was sleek and stylish, appealing to both professional and personal users alike.

In terms of technology, Dixon 2006 introduced significant improvements in processing power. Equipped with advanced processors that supported multitasking capabilities, users could comfortably run multiple applications without experiencing sluggishness. This advancement marked a shift in how users approached computing, allowing for more efficient workflows.

Additionally, Dixon 2006 integrated cutting-edge graphics capabilities, which were essential for tasks ranging from design to entertainment. The introduction of high-definition displays was revolutionary, providing crisp visuals that enhanced the overall user experience. This advancement in resolution allowed users to engage with content in ways that were previously unattainable.

Another distinctive characteristic was the inclusion of versatile connectivity options. Dixon 2006 supported various wireless technologies, facilitating seamless internet access and data transfer. This connectivity feature ensured that users could remain connected regardless of their location, further underscoring the device's portability.

Moreover, the user interface of Dixon 2006 was designed to be intuitive and user-friendly. This characteristic catered to a wider audience, including those who may not have been particularly tech-savvy. The operating system featured customizable settings, enabling users to tailor their experiences to their preferences.

In conclusion, Dixon 2006 marked a pivotal moment in personal computing, featuring a combination of portability, powerful processing, high-definition graphics, versatile connectivity, and an intuitive user interface. These characteristics together not only enhanced the functionality of the device but also set the stage for future innovations in the technology sector.
Top Page Image Contents