Dixon 2560 manual Lubrication, Hydrostatic Transmissions, Belts

CARE AND MAINTENANCE

LUBRICATION:

1.Engine: Follow engine manufacturer’s recommenda- tion.

2.Deck spindles: Lubricate with 3 “shots” only, every 100 hours.

HYDROSTATIC TRANSMISSIONS:

Before each use, check to be sure that the cooling fins and fans of the pumps and wheelmotors are clean. Excessive accumulation of oil, dirt, or trash may cause the transmissions to overheat. NEVER WASH ACROSS TOP OF RESERVOIR WITH WATER OR STEAM. Fill reservoir as required per the maintenance schedule listed in this book.

V-BELTS:

There are 3 v-belts on your Dixon Zero Turning Radius Mower. They should be checked every 50 hours. Replace any belts found to be in poor condition.

32