Dixon 2700 manual Specifications, Model

SPECIFICATIONS

Model 2700

CHASSIS:11 GA - rectangular tube, 7 GA reinforcement

SEAT:Designed for operator comfort with padded back & arm rests. Seat is adjustable fore & aft. Mounted on operator suspension system.

MOWER DECK: 2 decks are available. Both decks are made of 10 GA fabricated welded construction with 1/4 " reinforcement plate. 3 blades combine for either a 60" or 72" cut width. Deep deck with discharge tunnel. Cut height approximately 1.5" to 6" via 10 position lift handle.

BLADE DRIVE: "V" Belt with Electric clutch

DRIVE SYSTEM: Each rear wheel is independently driven by a HydroGear BDP-10A pump and White CE wheel motor.

ENGINE:27HP Kawasaki Twin, Liquid Cooled 4-Cycle, V- Configuration, Overhead Valve, Gasoline, Horizontal Shaft, Aluminum Head and Crankcase with Cast Iron Liners, Full Pressure Lubrication/Full Flow Filter, Electric Fuel Pump, Fixed Jet Carburetor, Electronic Ignition, In- Line Fuel Filter, Dual Element Air Cleaner.

STARTING SYSTEM: Electric by key switch operation with safety interlocks on parking brake, blade drive clutch and control levers.

TIRES:	Front	13-6.5x6
	Rear	23-10.5x12
RECOMMENDED	Front	16-20 lbs.
TIRE PRESSURE:	Rear	8-14 lbs.
CAPACITIES:	Fuel - 11 gallons (approx)
	Hydrostat oil system - 4 quart with in-line 40 micron filter
	Hydrostat oil recommendation - SAE 20W50 motor oil
	Engine - 2 quart. SAE 10W30 motor oil
DIMENSIONS:	Width	73.5"(60" Deck), 85.5"(72" Deck)
	Height	54"
	Length	87"
	Weight	1020 lbs.(60" Deck), 1054 lbs.(72" Deck)

Additional information provided in service instructions under the individual component.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.

14