SPARE PARTS
See your dealer for ordering spare parts or warranty service.
REMOVING AND REINSTALLING
MOWER DECK
1.Remove engaging handle by removing bolt and nut under handle.
2.Disconnect mower deck wire loom from frame wire loom.
3.Loosen belt keeper located under engine by loosening two (2) rear engine mount bolts to allow mower deck drive belt to come free of rear pulley. Retighten belt keeper.
4.Remove six (6) attach pins and clips from four
(4) mower deck attach points and two (2) stabilizer bars.
5.Mower deck may then be removed from unit for service or replacement. To reinstall, reverse the above procedure.
