Dixon 44 manual Specifications, SpeedZTR 38, 42

	SPECIFICATIONS
	SpeedZTR™ 38, 42 & 44
Chassis:	1-1/2 X 2 rectangle tube side frame
Mower Deck:	38”/42” - 13 ga stamped 2 blade deck.
	44” - 11 ga fabricated construction with reinforced ribs.
Blade Drive:	Electric clutch.
Transmission:	Each rear wheel is independently driven by a Hydro
	Gear EZT hydrostatic drive with cooling fan.

Engine:

SpeedZTR™38: 15 HP Briggs & Stratton Intek, 4 cycle, single cylinder, overhead valve, air cooled, gasoline, vertical shaft, cast iron cylinder, full pressure lube with spin-on filter.

SpeedZTR™42: 16 HP Briggs & Stratton Intek, 4 cycle, single cylinder, overhead valve, air cooled, gasoline, vertical shaft, cast iron cylinder, full pressure lube with spin-on filter.

SpeedZTR™44: 20 HP Briggs & Stratton twin cylinder engine, overhead valve, air cooled, gasoline, full pressure lube with oil filter, vertical shaft, aluminum head and block with cast-iron cylinder liners.

Starting	Electric-key switch operation with safety interlock blade
System:	drive.
Tires:	38/42” - Front 11 x 4.00-5 smooth tread (16-21 PSI)
	38” - Rear 18x7.50-8--4 ply turf tread (8-14 PSI)
	42” - Rear 18x8.50-8--4 ply turf tread (8-14 PSI)
	44” - Rear 18x9.50-8--4 ply turf tread (8-14 PSI)
Capacities:	Fuel	4.5 gallons
	Engine Oil	1.3 quarts
Dimensions:	Width	43” maximum track width
	Height	43” to top edge of seat
	Length	69” hitch tab to front bumper
	Weight	power unit - 482 lbs
		with 38” deck - 530 lbs
		with 42” deck - 537 lbs
		with 44” deck - 570 lbs

Additional information may be provided elsewhere in this manual.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

17