Manuals / Dixon / Lawn and Garden / Lawn Mower

Dixon 4000 Series CARE AND MAINTENANCE - 4000 SERIES MODELS, HOT oil may cause burns, Oil Fill

Models: 4000 Series

1 35

Download 35 pages 35.14 Kb

Page 25

HOT oil may cause burns.

CARE AND MAINTENANCE - 4000 SERIES MODELS

HOT oil may cause burns.

Allow engine to cool before draining oil.

CHANGING THE ENGINE OIL: MODELS ZTR 4421 & ZTR 4422

1.The "snap lock" oil drain valve is located on the left side of the engine crankcase.

2.Place a suitable container under -the drain valve. The fitting of a short piece of hose to the valve will help direct the oil.

3.Push the valve body in and twist to clear the detent notch.

4.Pulling the valve body outward will start the flow of oil.

NOTE: Refer to engine manufacturers recommendations for frequency of oil changes.

OIL FILL:

1.Push the valve body in and twist into the detent notch.

2.Clean any spilled oil from engine and chassis.

3.Refill engine with type, and quantity of oil recommended by the engine manufacturer in engine literature.

NOTE: Oil changes on the Model 4422 require replacement of the oil filter. This filter can be obtained from any authorized Kohler engine dealer. (P/N 52 050 02) The use of any other oil filter may cause damage to the engine.

PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS. PROTECT YOUR ENVIRONMENT

Page 22

Image 25

Dixon 4000 Series manual CARE AND MAINTENANCE - 4000 SERIES MODELS, HOT oil may cause burns, Oil Fill

Contents

Page FAX 316 IMPORTANT - READ CAREFULLYINDEX SAFETY SYMBOLS SAFETYSAFETY GENERAL OPERATIONserious injury or death PageSAFETY SLOPE OPERATIONSAFETY CHILDRENpresence of children Be alert to avoid accidentsSAFETY SERVICEbTransaxle adjustments Models ZTR SPECIFICATIONSDIMENSIONS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICEModels ZTR 4421 & ZTR SEAT ADJUSTMENT INSTRUCTIONSPage CONTROLSEngage parking brake before starting engine CONTROLSPARKING BRAKE TO SET PARKING BRAKETOGO FORWARD CONTROLSTO GO BACKWARD TURNINGLocated to the right and front of operator CONTROLSPage13 OPERATION INSTRUCTIONSMOWING WITH A MULCHING ATTACHMENT OPERATION INSTRUCTIONSMOWING WITH A GRASS CATCHER ATTACHMENT OPERATION INSTRUCTIONSSIDE DISCHARGE OF THE CLIPPINGS OPERATION INSTRUCTIONSGRASS HEIGHT SUGGESTIONS Before performing any maintenance CARE AND MAINTENANCE - 4000 SERIES MODELSMAINTENANCE SCHEDULE BATTERYCUTTER BLADE MAINTENANCE CARE AND MAINTENANCE - 4000 SERIES MODELS1.Safely raise front of mower 2.Hold or block blade from turningBELT TENSION CARE AND MAINTENANCE - 4000 SERIES MODELSENGINE TO MOWER DECK BELT MOWER DECK SERPENTINE BELTDECK REMOVAL CARE AND MAINTENANCE - 4000 SERIES MODELSSERVICE INTERVALS CARE AND MAINTENANCE - 4000 SERIES MODELSFUEL SHUT OFF VALVE LUBRICATIONHOT oil may cause burns CARE AND MAINTENANCE - 4000 SERIES MODELSAllow engine to cool before draining oil CHANGING THE ENGINE OIL MODELS ZTR 4421 & ZTRDRIVE SYSTEM ADJUSTMENTS CARE AND MAINTENANCE - 4000 SERIES MODELSREAR CHAIN ADJUSTMENT CLEANING THE MOWER SERIAL NUMBERS WARRANTY CARE AND MAINTENANCE - 4000 SERIES MODELSPARTS/SERVICE ANIMALS IN YOUR AREAPre-CleanerFoam Element STANDARD SERVICE PARTS LISTCartridge Air Cleaner MODELS ZTR 4421 & ZTRTROUBLESHOOTING DRIVE SYSTEM TROUBLESHOOTINGSITUATION CAUSESStarter will not TROUBLESHOOTINGStarter will not TROUBLESHOOTINGOWNER INFORMATION Page July 1994 P/N 316 251 2OOO FAX