MAINTENANCE

Cutting Blades

To attain the best mowing effect, it is important that the blades are well sharpened and not damaged.

Bent or cracked blades or blades with large nicks should be replaced.

IMPORTANT INFORMATION

The sharpening of blades should be carried out by an authorized service workshop.

Damaged blades should be replaced after hitting obstacles that result in a breakdown. A service workshop should decide whether the blade can be repaired/ground or must be replaced. Balance the blades after sharpening and check the blade mounts.

Blade replacement

1.Remove blade bolt by turning counter clockwise.

2.Install new or resharpened blade with stamped “GRASS SIDE” facing towards ground/grass (down) or “THIS SIDE UP” facing deck and cutter housing.

3.Install and tighten blade bolt securely.

4.Torque blade bolt to 90 ft/lbs (122 Nm).

IMPORTANT INFORMATION

The anti-scalp rollers must not be used for gauge wheels or the roller and deck may be damaged.

Anti-scalp Rollers

Anti-scalp rollers are properly adjusted when they are just slightly off of the ground when the deck is at the desired cutting height in the operating position. Anti- scalp rollers then keep the deck in the proper position to help prevent scalping in most terrain conditions.

IMPORTANT INFORMATION

Adjust anti-scalp rollers with the mower on a flat level surface.

The anti-scalp rollers can be set in three positions:

•Upper position 1½ to 2½" (38 to 64 mm) grass

•Middle position 2½" to 4" (64 to 102 mm) grass

•Lower position 4" to 6" (102 to 128 mm) grass.

The rollers should be approximately ¼" (6.5 mm) from ground. Do not adjust the rollers to support the deck.

WARNING!

Blades are sharp. Protect your hands with gloves and/or wrap blades with a heavy cloth when handling.

IMPORTANT INFORMATION

Special blade bolt is heat treated. Replace with a Dixon bolt if required.

Do not use lower grade hardware than specified.

3

1

2

8058-082

1.Blade

2.Blade bolt (special)

3.Cutter housing

Blade attachment

8050-830

Anti-scalp rollers

40

Page 39 Page 41
Page 40
Image 40
Dixon 966496201, 46BF, 42BF, 965883201, 965883101, 54BF, 966496301 manual Cutting Blades, Anti-scalp Rollers, Blade replacement
Page 39 Page 41

965883201, 965883101, 966496301, 54BF, 42BF specifications

The Dixon 46BF,966496201,42BF,54BF,966496301 is a remarkable technological advancement in the realm of machinery and instrumentation. This model combines cutting-edge features with robust performance capabilities, catering to diverse industrial applications.

One of the standout features of the Dixon 46BF series is its high efficiency. Designed with advanced aerodynamics, it optimizes energy consumption while ensuring peak performance. The incorporation of the latest engine technologies enhances fuel efficiency, making it a cost-effective option for businesses looking to reduce operational costs without compromising on power.

Safety is a paramount consideration in the design of the Dixon 46BF model. It comes equipped with state-of-the-art safety features that minimize the risk of accidents during operation. This includes advanced sensor systems that monitor various parameters in real-time, ensuring that any deviations from the standard operating conditions are promptly addressed.

The construction of the Dixon 46BF series emphasizes durability. Made from high-quality materials, it is engineered to withstand demanding environments, minimizing wear and tear. This investment in quality ensures longevity, reducing the need for frequent repairs or replacements.

Moreover, the Dixon 46BF series incorporates smart technology into its design. With connectivity options, it can be integrated into existing digital infrastructures. This allows for remote monitoring and control, enabling operators to manage their machinery from virtually anywhere, enhancing operational flexibility and responsiveness.

Another characteristic that sets the Dixon 46BF apart is its customization capabilities. Clients can choose from various options tailored to their specific needs, whether it’s adjusting performance parameters or selecting additional features. This level of customization ensures that the machinery aligns perfectly with individual operational requirements.

In terms of maintenance, the Dixon 46BF is designed with user-friendliness in mind. Simplified access to key components facilitates quicker servicing, reducing downtime and improving overall productivity.

Overall, the Dixon 46BF,966496201,42BF,54BF,966496301 is a blend of innovation, efficiency, and reliability, making it an excellent choice for companies seeking a solution that meets modern industrial challenges while ensuring sustainability and safety. With its array of features and technologies, it stands as a benchmark in industrial machinery, poised to lead the future of operational excellence.
Top Page Image Contents