Dixon 5000 Series Controls, Parking Brake, CAUTION Engageengine parking brake before starting

Models: 5000 Series

1 48
Download 48 pages 6.65 Kb
Page 14
Image 14
PARKING BRAKE:

CONTROLS

PARKING BRAKE:

The parking brake used on the 5000 Series Models is designed to hold the mower from moving and is not intended for use in stopping the mower while it is in motion.

CAUTION Engageengine parking brake before starting

Do not leave engine running for extended periods of time without the parking brake engaged. Damage to the drive system could result.

TO SET PARKING BRAKE:

The hand operated parking brake is located at left hand side of mower.

To engage brake, pull lever up and to the rear. To release

brake, move lever forward and down. NOTE: Always set

parking brake before dismounting. Release parking brake

before moving mower.

HYDRO-GEAR DRIVE SYSTEM:

Allows the mower to turn on its own axis (zero turning radius).

Control levers control braking, turning, travel speed and direction. Each lever controls one side of the mower.

NOTE: The pressure required to operate the mower is very light.

First-time operators should spend a minimum of 1/2 hour driving the mower without the blade drive engaged to become familiar with the controls.

Page 12

Page 14
Image 14
Dixon 5000 Series manual Controls, CAUTION Engageengine parking brake before starting, To Set Parking Brake