CARE AND MAINTENANCE - MODEL 560
This portion of the Model 560 owners manual deals with normal service items which can be performed by the owner. Please remember that if you are in doubt as to the correct service procedures to be followed, these and other service situations can be handled by a Dixon ZTR Dealer who is familiar with the service of your mower.
NOTE: Due to the precision nature of the hydrostatic transmissions used on the Model 560, internal service repairs cannot be recommended. Current service requirements will necessitate replacement of an entire hydro unit if failure should occur.
MAINTENANCE SCHEDULE:
To insure a long and trouble free service life on all the components used on the Model 560 a regular and thorough maintenance schedule should be followed. As with any type of precision made equipment, a certain amount of initial bedding in or seating of the components will take place. The following items should be checked after the first (10) hours of operation and on a weekly basis, or each (40) hours of use:
1.Drive system, belts and controls.
2.Mower deck belts.
3.Tire pressures.
4.Hydrostat oil.
5.Tightness of all nuts and bolts.
6.Electric blade clutch air gap setting.
*Refer to Page 16 for details
Refer to engine service manual provided with your mower for maintenance schedules and procedures to be used on the engine.
Page 15
