CARE AND MAINTENANCE

PROCEDURE FOR RAISING AND LOWERING THE DECK FOR SERVICING

RAISING THE DECK:

A.Remove cut height adjustment pin and completely lower the cut height adjustment lever. Re-insert the cut height adjustment pin into the 3-1/2" cut height position (this will lock the cut height adjustment lever into the lowest position.

B.Flip up the foot deck to allow access to the engine to deck drive blet. Roll the engine to deck drive belt off the center spindle. Hook the engine to deck drive belt onto the bolt protruding out of the top of the foot deck support angle.

C.Lift the rear corner of the deck and disconnect the rear deck mounting latch. Repeat for the other side.

D.Position the front caster sheels so they are away from the deck (such as the tractor would bve traveling in reverse).

E.Attached a hoist to the deck lift bolt. lift the nose of the deck until the deck is standing vertical and the deck latch engages.

IMPORTANT NOTE: MAKE SURE THAT THE DECK IS LIFTED FAR ENOUGH FOR THE DECK LATCH TO FULLY ENGAGE THE LOCKING PIN (LOCATED ON THE LEFT SIDE OF THE DECK MOUNTING SUSPENSION). THIS WILL PREVENT THE DECK FROM FALLING DOWN WHEN SERVICING THE UNDERSIDE OF THE MOWER DECK.

LOWERING THE DECK:

A.While lifting the nose of the deck disengage the deck latch from the locking pin. Push the bottom of the deck towards the rear of the tractor while holding the deck latch so that it clears the locking pin. Lower the deck until it rests on the ground.

B.Lift the rear corner of the deck and reconnect the rear deck mounting latch. Repeat for the otherside.

C.Roll the engine to deck drive belt back onto the center spindle. Insure that the engine to deck drive belt is installed onto all of the pulleys and idlers in the drive train.

D.Lower the foot deck down into the operation position.

Page 32

Page 31 Page 33
Page 32
Image 32
Dixon 7000 manual Procedure for Raising and Lowering the Deck for Servicing
Page 31 Page 33

7000 specifications

The Dixon 7000 is a state-of-the-art equipment known for its versatility and efficiency in various applications. It has become a preferred choice among professionals seeking reliability and cutting-edge technology. This machine stands out due to its robust construction, ensuring durability and a long service life, which is crucial in demanding environments.

One of the main features of the Dixon 7000 is its advanced powertrain. It is equipped with a high-performance engine that delivers exceptional torque and performance. This enables operators to tackle heavy-duty tasks with ease, optimizing productivity while minimizing downtime. The efficient engine design also contributes to better fuel economy, making it a cost-effective solution for businesses.

In terms of technology, the Dixon 7000 incorporates sophisticated control systems that enhance operation and precision. The intuitive interface allows operators to easily manage settings and monitor performance metrics in real-time. This feature not only boosts user confidence but also ensures that operations are conducted safely and efficiently.

Equipped with a powerful hydraulic system, the Dixon 7000 excels in lifting and moving heavy loads. Its hydraulic capabilities are coupled with hydraulic attachments that enhance functionality, allowing for a wide range of tasks from lifting to maneuvering materials. This versatility makes it suitable for industries such as construction, agriculture, and logistics.

Another key characteristic of the Dixon 7000 is its ergonomic design. Comfort is a priority, with controls and seating designed to reduce operator fatigue. This ergonomics-focused design results in higher productivity, as operators can work for longer periods without discomfort. Additionally, the noise levels are kept to a minimum, ensuring a more pleasant working environment.

The Dixon 7000 also features advanced safety mechanisms, including a robust braking system and stability controls, which significantly reduce the risk of accidents. The presence of maintenance alerts keeps operators informed about service schedules, promoting longevity and optimal performance.

In conclusion, the Dixon 7000 represents a culmination of robust engineering, advanced technology, and user-centered design. Its main features and versatile characteristics make it an invaluable asset across various industries, supporting operators in achieving their tasks efficiently and safely. The combination of performance, ergonomics, and safety makes the Dixon 7000 a standout choice for those in need of reliable heavy equipment.
Top Page Image Contents