UNPACKING INSTRUCTIONS
•Remove all parts and packing materials from carton.
•Check carton contents against list. Be sure all parts are there.
CONTAINER CONTENTS
2 | - Soft bag containers | 1 | - Bag of Hardware |
1 | - Upper Chute | 1 | - Lower Chute |
1 | - Cover Assembly | 1 | - Mounting Hardware |
TOOLS REQUIRED
• | ½" Wrench (2) | • | 9/16" Wrench (2) |
• | 7/16" Wrench (2) | • | Ft/Lbs Torque Wrench |
• | Drill | • ¼" and 5/16" Drill Bits | |
•9/16" Socket and Ratchet
•Standard Screwdriver
PARTS IDENTIFICATION
UPPER CHUTE
COVER ASSEMBLY
LOWER CHUTE
BAG CONTAINERS 
NOTE: When right hand (RH) and left hand (LH. are mentioned in this manual, it means when you are seated on the mower in the operator’s position.
CAUTION
BEFORE ASSEMBLING GRASS CATCHER TO MOWER:
•Set parking brake.
•Place motion control levers in “NEUTRAL” position.
•Turn ignition key “OFF” and remove key.
•Make sure the blades and all moving parts have completely stopped.
•Disconnect spark plug and place wire where it cannot come in contact with plug.
7
