ASSEMBLY
UNPACKING INSTRUCTIONS | CARTON 1 CONTENTS |
|
| |
• Remove all parts and packing materials from both | 1 - Upper Chute | 1 | - Owner’s Manual | |
cartons. | 1 - Flex Hose | 1 | - Hanger Bracket | |
• Check carton contents against list. Be sure all | 1 - Bagger Support | 1 | - Weight Kit | |
parts are there. | 2 | - High Lift Blades | 1 | - Hose Clamp |
| ||||
| 2 | - Support Straps | 1 | - Cast Weight |
| 1 | - Weight Box | 1 | - Baffle |
| 1 | - Discharge Adapter | 1 | - Decal |
| 1 | - Discharge Mount Bracket |
|
|
PARTS IDENTIFICATION
Cover
Assembly
Grass
Catcher
Containers
CARTON 2 CONTENTS
1 - Cover Assembly | 2 - Soft Bag Containers |
Flex Hose
NOTE: When right hand (RH) and left hand (LH) are mentioned in this manual, it means when you are seated on the mower in the op- erator’s position.
WARNING
BEFORE ASSEMBLING GRASS BAGGER TO MOWER:
•Set parking brake.
•Place motion control levers in “NEUTRAL” position.
•Turn ignition key “OFF” and remove key.
•Make sure the blades and all moving parts have completely stopped.
•Disconnect spark plug and place wire where it cannot come in contact with plug.
7
