ContRols
17
This operator’s manual describes the dixon Zero Turn
rider. The rider is tted with a Kohler or Briggs &
Stratton four-stroke overhead valve engine developing
24-26* horse power.
Transmission from the engine is made via two
Control Locations
motion control levers1.
Seat adjustment lever2.
Cutting height adjuster3.
Throttle control4.
Choke control5.
Ignition switch6.
1
3
45689
2
10 7
11
Hour meter7.
Blade switch8.
fuses9.
fuel shut off valve10.
fuel tank cap11.
Parking brake12.
12
belt-driven hydraulic pumps, which in turn drive a
hydraulic motor for each drive wheel. Using the left
and right steering controls, the ow is regulated and
thereby the direction and speed.
*The power rating of the engines indicated is the average net power
output (at specified rpm) of a typical production engine for the
engine model measured to SAE standard J1349/ISO1585. Mass
production engines may differ from this value. Actual power output
for the engine installed in the final machine will depend on the
operating speed, environmental conditions and other variables.