Manuals / Dixon / Lawn and Garden / Lawn Mower

Dixon ZTR manual Belts, Belt Tension, Care And Maintenance, Engine to Mower Deck Belt

Models: ZTR

1 52

Download 52 pages 28.5 Kb

Page 37

Image 37

CARE AND MAINTENANCE

BELTS:

Check belts every 50 hours. Replace any belts found to be in poor condition.

BELT TENSION:

Engine to Mower Deck Belt:

P/N 11339

To adjust tension of the mower deck drive belt, turn adjuster nut on threaded eyebolt. Turning nut to the right will make the belt tighter. Turning nut to the left will loosen the belt.

Note: Belt deflection or movement should be approximately 1/4” when measured at mid-point between pulleys. Periodically inspect both belt and idler systems.

Page 37

Image 37

Dixon ZTR manual Belts, Belt Tension, Care And Maintenance, Engine to Mower Deck Belt

Contents

Operator’s Manual Safety InstructionsKODIAK DIESEL ZTR IMPORTANT - READ CAREFULLY STANDARD SERVICE PARTS LIST TABLE OF CONTENTSPage 4-15Blade Contact Tip Over Run Over Back Over SAFETYWhen you see this symbol, BE ALERT to the potential for injury Safety Alert SymbolFollow the recommended safety precautions and safe operating practicesGENERAL OPERATION GENERAL OPERATION continued Never dismount mower without applying parking brake or stopping engine GENERAL OPERATION continuedSLOPE OPERATION SLOPE OPERATION continued Do not mow on wet grass. Reduced traction could cause sliding SLOPE OPERATION continuedFIRE HAZARDS Failure to observe the following safety instructions FIRE HAZARDS continuedcould result in serious injury or death CHILDREN SERVICE Black BearTM, Kodiak, Grizzly & SilverTip Mowers DIXON ZTR PRO SERIES COMMERCIAL/RESIDENTIAL WARRANTY POLICYKODIAK DIESEL SPECIFICATIONS1. Grasp seat slide adjuster and move it into adjustment position SEAT ADJUSTMENT INSTRUCTIONS2. Slide seat forward or backward 3. Release seat slide adjuster CONTROL LEVERS CONTROLSTO SET PARKING BRAKE PARKING BRAKEMOWER DECK CUT HEIGHT LIFT LEVER CONTROLSCIRCUIT BREAKER BLADE DRIVETHROTTLE CONTROL LEVER CONTROLSBEFORE OPERATING MOWER OPERATION INSTRUCTIONSOPERATION INSTRUCTIONS STARTING INSTRUCTIONSOPERATION INSTRUCTIONS TESTING OF SAFETY INTERLOCK SYSTEMSBLADE DRIVE SWITCH TEST a Put parking brake in ON position TESTING OF SAFETY INTERLOCK SYSTEMSOPERATION INSTRUCTIONS OPERATION INSTRUCTIONS MOWING WITH A MULCHING ATTACHMENTOPERATION INSTRUCTIONS MOWING WITH A MULCHING ATTACHMENT continuedOPERATION INSTRUCTIONS MOWING WITH A GRASS CATCHER ATTACHMENTOPERATION INSTRUCTIONS MOWING WITH A GRASS CATCHER ATTACHMENT continuedFailure to observe the following instructions WARNING may result in personal injuryOPERATION INSTRUCTIONS SIDE DISCHARGE OF THE CLIPPINGS5. Maintain sharp blades throughout the cutting season OPERATION INSTRUCTIONS GRASS HEIGHT & CUTTING SUGGESTIONSTO FREE WHEEL MACHINE Unlock Transmission TOWING TRAILERS AND OTHER ATTACHMENTSOPERATION INSTRUCTIONS MAINTENANCE SCHEDULE CARE AND MAINTENANCEBefore performing any maintenance, turn off engine allow to cool & remove key Use extreme care when working on machineryCARE AND MAINTENANCE CUTTER BLADE MAINTENANCEENGINE BATTERYCARE AND MAINTENANCE LUBRICATION TIRESCARE AND MAINTENANCE BELT TENSION BELTSCARE AND MAINTENANCE Engine to Mower Deck BeltCARE AND MAINTENANCE CHANGING THE ENGINE OILOIL FILTERS OIL FILLCARE AND MAINTENANCE CARE AND MAINTENANCE HYDROSTATIC TRANSMISSION FLUID FILTER SERVICESERVICE INTERVALS RECOMMENDED FLUIDCARE AND MAINTENANCE HYDROSTAT FLUID MAINTENANCE PROCEDURE15W-50 SYNTHETIC HYDROSTATIC FLUID OR 20W-50 CARE AND MAINTENANCE NEUTRAL ADJUSTMENTCARE AND MAINTENANCE NEUTRAL SPRING ADJUSTMENTCARE AND MAINTENANCE LEVELING THE DECKCARE AND MAINTENANCE MOWER DECK REMOVAL3. Remove hardware connecting rear hangers to mower deck 2 places 4. Remove hardware connecting front hangers to mower deck 2 placesWARRANTY CLEANING THE MOWERPARTS/SERVICE ELECTRICAL SYSTEMSTROUBLESHOOTING 7. MOWER LOSES POWER OR TRANSMISSION OVERHEATS TROUBLESHOOTING8. ENGINE STALLS WHEN BLADES ARE ENGAGED 6. ENGINE RUNS BUT MOWER WON’T MOVE FORWARDBlades STANDARD SERVICE PARTS LISTBelts ENGINE AIR AND OIL FILTERSPage Name Address OWNER’S INFORMATIONDATE OIL CHANGED DATE ENGINE TUNEDDIXON INDUSTRIES, INC Dixon and ZTR are registered trademarks of Dixon Industries, IncP.O. Box Coffeyville, Ks