Dixon ZTR 4515B Controls, Parking Brake, CAUTION Engage parking brake before starting engine

Models: ZTR 4516K ZTR 4515B

1 39
Download 39 pages 36.42 Kb
Page 14
Image 14
PARKING BRAKE:

CONTROLS

PARKING BRAKE:

The parking brake is designed to hold the mower from moving and is not intended for use in stopping the mower while it is in motion. The engine will stop if the parking brake is engaged while the control levers are in the drive position.

CAUTION Engage parking brake before starting engine.

TO SET PARKING BRAKE:

The hand operated parking brake is located on the right fender.

To engage brake, pull lever up(to the rear).

To release brake, move lever forward (down).

NOTE: Always set parking brake before dismounting.

Release parking brake before moving mower.

TRANSMISSION DRIVE SYSTEM:

Allows the mower to turn on its own axis "Zero Turning Radius"

Each lever controls one side of the mower.

NOTE: The pressure required to operate the mower is very light.

Page 14

Page 14
Image 14
Dixon ZTR 4515B, ZTR 4516K manual Controls, CAUTION Engage parking brake before starting engine, To Set Parking Brake