CARE AND MAINTENANCE

LEVELING THE DECK:

A.Set the tire pressure on all four tires.

B.Move the tractor to a hard, level surface (i.e. concrete or blacktop). Place a 2x4 board under all four corners of the deck shell, just inside the anti-scalping wheels. Lower the deck down onto the boards. The deck must rest on the boards, not on the anti-scalping wheels. Adjust the deck hangers longer or shorter until the deck “just” comes off of the boards in front. Raise the rear 1/4” above the boards. Remove the boards and verify that the deck is hanging on all four deck hangers, re-adjust if necessary. Lock the jam nuts on the deck hangers. (Note: the two rear deck hangers will be easier to adjust if the fender skirts are removed.)

Page 33
Image 33
Dixon 13636-0702, ZTR 7525 manual Leveling the Deck