Dixon ZTR GRIZZLY BELTS:, BELT TENSION:

CARE AND MAINTENANCE

BELTS:

Check belts every 50 hours. Replace any belts found to

be in poor condition.

BELT TENSION:

Mower Deck Serpentine Belt

P/N 1300 (50”) 9758 (60”)

Manual adjustment.

Refer to illustrationfor adjustment procedure.

Engine to Mower Deck Belt

P/N 18282 (50”) 18280 (60”)

The engine to mower deck drive belts are automatically

held in proper tension by springs which push the deck

assembly forward and do not require any additional

adjustment to be made.

Note: Belt deflection or movement should be approximately

1/4” when measured at mid-point between pulleys.

Periodically inspect both belt and idler systems.

Idler Weldment

3/4”

(50” & 60” Serpentine)

“L” Rod

Idler Shock Mount

Hex Nut

Tighten or Loosen

Hex Nut to achieve

this dimension

Contents

Main Page TABLE OF CONTENTS Page SAFETY GENERAL OPERATION: Never Page GENERAL OPERATION (continued): SLOPE OPERATION: Page SLOPE OPERATION (continued): DO NOT FIRE HAZARDS: FIRE HAZARDS (continued): CHILDREN: SERVICE: 16 DIXON ZTR PRO SERIES COMMERCIAL/RESIDENTIAL WARRANTY POLICY Kodiak, Grizzly & SilverTip Mowers SPECIFICATIONS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 17 GRIZZLY Page CONTROL LEVERS Note: For access to the seat, move control levers to neutral position and swing them outward. CAUTION MOWER DECK CUT HEIGHT LIFT LEVER: PARKING BRAKE: TO SET PARKING BRAKE: BLADE DRIVE: CIRCUIT BREAKER: CHOKE AND THROTTLE CONTROL LEVERS: NEVER BEFORE OPERATING MOWER: STARTING INSTRUCTIONS: Page TESTING OF SAFETY INTERLOCK SYSTEMS: MOWING WITH A MULCHING ATTACHMENT: Do not attempt to cut grass when it is wet. Maintain sharp blades throughout the cutting season. MOWING WITH A MULCHING ATTACHMENT (continued): MOWING WITH A GRASS CATCHER ATTACHMENT: MOWING WITH A GRASS CATCHER ATTACHMENT (continued): Maintain sharp blades throughout the cutting season. WARNING SIDE DISCHARGE OF THE CLIPPINGS: Do not attempt to cut grass when it is wet. 5. Maintain sharp blade(s) throughout the cutting season. GRASS HEIGHT & CUTTING SUGGESTIONS: TOWING TRAILERS AND OTHER ATTACHMENTS: TO FREE WHEEL MACHINE (Unlock Transmission): MAINTENANCE SCHEDULE CUTTER BLADE MAINTENANCE: ENGINE: BATTERY: TIRES: LUBRICATION: BELTS: BELT TENSION: CAUTION CHANGING THE ENGINE OIL: OIL FILL: OIL FILTERS: CAUTION HYDROSTATIC TRANSMISSION FLUID & FILTER SERVICE: Dirt or water in fluid can ruin the hydrostatic transmissions. SERVICE INTERVALS: RECOMMENDED FLUID: HYDROSTAT FLUID MAINTENANCE PROCEDURE: NEUTRAL ADJUSTMENT NEUTRAL SPRING ADJUSTMENT: MOWER DECK LEVELING PROCEDURE: MOWER DECK LEVELING PROCEDURE (continued): MOWER DECK REMOVAL: Page Page TROUBLESHOOTING MOWER LOSES POWER OR TRANSMISSION OVERHEATS STANDARD SERVICE PARTS LIST OWNERS INFORMATION