Dixon ZTR Mowers Drive Chain Adjustment, Front Caster Assembly, Wheels and Tires, Body, Transaxle

DRIVE CHAIN ADJUSTMENT

Mower is equipped with manually adjusted drive chain tension idlers, one for each chain at rear of mower.

To adjust drive chains, tighten nut on chain ten-sioner L-rod until spring P/N 5133 is nearly compressed as shown.

	PROPER TENSION
NEEDS ADJUSTMENT

Inspection of the chains will show the need for adjustment when the spring P/N 5133 is free of tension. Inspect chains after each 10 to 12 hours of operation. Proper lubrication is important for effective roller chain operation. Use high quality lubricating oil or motorcycle chain lube. (Do not use grease or heavy oil). Apply drops of oil to chain joints after every 25-50 hours of operation. DO NOT LUBRICATE IF OPERATED IN HEAVY DUST OR SAND.

FRONT CASTER ASSEMBLY

Each caster assembly has a grease fitting on the under side of the bearing. Grease with a multipurpose grease once a year. All other bearings are sealed and require no lubrication.

WHEELS AND TIRES

Correct tire pressure is important for correct operation of mower.

Rear-drive tires: 8-12 Ibs. for 18x9.50-8 tires.

	12-14 Ibs. for 16x6.60-8 tires & 18x6.50
Front tires	20-24 Ibs.

Check lug nuts periodically for tightness.

ELECTRICAL SYSTEMS

Keep all connections clean and tight.

BODY

Wash with mild detergent.

TRANSAXLE

See your authorized Dixon Dealer for adjustment or repair.

ADJUSTMENT OR REPAIR BY OTHER THAN AUTHORIZED DIXON DEALER VOIDS WARRANTY.