How to install and
operate the
DLS CA12
500Watts
mono amplifier
Welcome!
This owners manual is written in easy english and uses a lot of drawings to simply the installation and use of the above amplifier.
Your DLS amplifier must be installed correctly in or- der to work well. This manual will show you how to install the amplifier like a pro. Please read the entire manual before beginning the installation.
Install the amplifier yourself if you feel confident with our instructions and if you have the proper tools. However if you feel unsure, turn over the installation job to someone better suited to it.
Warranty Service
This amplifier is covered by warranty, depending on the conditions in the country where it is sold. If the amplifier is returned for service, please include the original dated receipt with the product.
Technical Assistance
For technical assistance ask the shop where the product was sold or the distributor in your very coun- try.
You can always phone the DLS Helpdesk in Sweden
+46 31 84 00 60 or send an
DLS Svenska AB
P.O. Box 13029
Tel: +46 31 840060
Fax: +46 31 844021
www.dls.se
Contents |
|
Specifications | 1 |
Features…………………………….. | 2 |
Installation…………………….……. | 2 |
2 | |
Tools and materials needed………. | 3 |
Amplifier installation kit………….... | 3 |
Routing Wires…………………….... | 3 |
Wiring |
|
Power and Outputs……………..…. | 4 |
Inputs and controls………………... | 5 |
Input level control | 5 |
Crossovers………… | 5 |
Phase control.....………………...… | 6 |
Speaker wiring.............………….…. | 6 |
Testing | 6 |
Professional tips…………………….. | 7 |
Specifications
DLS CLASSIC | CA12 |
|
|
Number of channels | 1 |
Power output: |
|
R.M.S. output in 4 ohm (0,1% THD) | 1 x 220 W |
R.M.S. output in 2 ohm (0,4% THD) | 1 x 400 W |
R.M.S. output in 1 ohm (0,5% THD) | 1 x 500 W |
All above output power ratings at 13,8 Volt | |
Signal to noise ratio, | >100 dB |
Damping factor | >100 |
Frequency response | 10 Hz - 35 kHz |
Input impedance, low level | 10 kohm |
Input impedance, high level | 100 ohm |
Input sensitivity | 0,25 - 5V |
RCA output | yes |
Phase control | yes |
Filter subsonic | 15 - 150 Hz |
Filter lowpass 12/24 dB slope | 50 - 500 Hz |
Power consumption, idle | 0,8 A |
Maximum current draw | 80 A |
yes | |
Fuse | 2 x 30A |
Dimensions (mm) | 67x295x250 |
Dimensions (inch) | 2,63x11,6x9,84 |
Weight | 3,8 kg (8,4 lb) |
Approval of electromagnetic compatability according to the EEC Directive 95/54/EC
E 13 Approval No: 022495
We follow a policy of continuous advancement in development. For this reason all or part of specifications & designs may be changed without prior notice.
