2 SR835 Crossover
FRONT PANEL
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
1.Power Switch - Used to engage or disengage the power to the SR835.
2.Mono/Stereo Switch - This switch configures the SR835 as two indepen- dent channels of 2 way splits, or one channel with a 3 way split.When the switch is in and the LED is lit, the SR835 is in Mono mode.
3.Gain - This is the input level for Channel 1 in Stereo mode, and is the mas- ter input level in Mono mode.
4.Low Level - This knob controls the volume for the low frequency output in both Stereo and Mono modes.
5.High Level - This knob controls the volume for the Channel 1 high frequen- cy output in Stereo mode, and has no function in Mono mode.
6.Frequency - This knob sets the crossover frequency separating the lows from the mids in Mono mode, and the lows from the highs for Channel 1 in Stereo mode.
7.Range Switch - When depressed, this switch will multiply the selected crossover frequency by 10.The LED will light indicating that the markings on the Frequency knob (6) should be multiplied by 10.
8.Channel 2 Gain - This is the input level for Channel 2 in Stereo mode. In Mono mode this knob has no function.
9.Low/Mid Level - This knob controls the volume for the Channel 2 low fre- quency output in Stereo mode, and the
10.High Level - This knob controls the volume for the Channel 2 high fre- quency output in Stereo mode, and the high frequency output in Mono mode.
11.Frequency - This knob sets the crossover frequency separating the mids from the highs in Mono mode, and the lows from the highs for Channel 2 in Stereo mode.
12.Range Switch - When depressed, this switch will multiply the selected crossover frequency by 10.The LED will light indicating that the markings on the Frequency knob (11) should be multiplied by 10.