18
Chapter 2 Installing the LCD TV
HDMI2 INHDMI1 IN VGA INPC AUDIO IN
VIDEO
S-VIDEO
S-VIDEO IN
VIDEO 1 IN
COAXIAL
TV
CABLE/AIR
LL
R
L R R
YPbPr1 IN
Y Pb Pr
AUDIO
YPbPr2 IN
Y Pb Pr
AUDIO
HDMI2 INHDMI1 IN VGA INPC AUDIO IN
VIDEO
S-VIDEO
S-VIDEO IN
VIDEO 1 IN
COAXIAL
TV
CABLE/AIR
LL
R
L R R
YPbPr1 IN
Y Pb Pr
AUDIO
YPbPr2 IN
Y Pb Pr
AUDIO
 Use a supplied antenna cable to connect the TV signal to the LCD TV’s TV CABLE terminal.
 Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.
VHF/UHF INHDTV/TVAir/Cable
VHF/UHF INHDTV/TVAir/Cable
BE SURE TO UNPLUG AC POWER CORD BEFORE REMOVING THE FUSE.

This TV is equipped with a safety fuse. In the event of an electrical storm or power outage

the safety fuse is designed to protect your TV. If your TV has no power, check the fuse by

prying the cover off, following the illustration below.

If the fuse is blown, visit your local hardware store and ask for a 4A 250V - 5x20mm Time

Lag Fuse (Slow Blow) to replace the fuse.

4A250V

5x20mm

Fuse

Back of TV

FirmPlastic Prying Tool
(Usinga metal tool may cause shock)
 Press the button on the remote to turn on the LCD TV.
Always disconnect the LCD TV from the main voltage when the LCD TV will not
be used for a long period of time. The POWER button on the front panel is only
used for switching the LCD TV into standby, it does not disconnect the device
from the main voltage. To completely disconnect the main voltage, please
remove the power plug from the socket.