Dolmar PS-34 PUTTING INTO OPERATION

Position the guide bar (6). Make sure that the pin (7) of the chain

tightener is in the hole on the guide bar.

Turn the chain adjusting screw (4) to the left (counterclockwise)

until the pin (5) is at the left stop.

Mounting the guide bar and saw chain

Use the universal wrench delivered with the chain saw for

the following work.

Put the chain saw on a stable surface and carry out the following

steps for mounting the guide bar and chain:

Release the chain brake by pulling the hand guard (1) in direc-

tion of arrow.

Unscrew retaining nuts (2).

Pull off the sprocket guard (3).

PUTTING INTO OPERATION

CAUTION:

Before doing any work on the guide bar or chain, always

switch off the engine and pull the plug cap off the spark

plug (see "Replacing the spark plug"). Always wear protective

gloves!

CAUTION:

Start the chain saw only after having assembled it com-

pletely and inspected!

Contents

Main PS-34 Owners and Safety Manual for Gasoline Chain Saws Manuel demploi et de scurit de trononneuses thermiques (page 35 - 67) Page RE Y Page Safety precautions for chain saw operators Additional safety precautions General Safety Precautions The operator ANSI B175.1-1991 Discription of symbols used on chain saws: 3 The saw 4 The use of the saw Proper clothing Chain saw operating instructions 6a 10 feet 5a 6 Important adjustments Working conditions Cutting instructions 8 7 9 10 12 Kickback: 11 Saw chain cutter sharpness: 13 To avoid kickback 16 To avoid pushback Cutting techniques Felling Pushback: 14 45 Sectioning Method 24 28 Plunge-Cut Method 25 Limbing 29 Bucking 31 30 32 33 34 35 Maintenance and Repair Maintaining and storing the saw Page Approved bar and chain combinations Technical data PS-34 Mounting the guide bar and saw chain PUTTING INTO OPERATION CAUTION: 3 813 8 12 8 10 G H Tightening the saw chain Checking the chain tension Tightening the saw chain Chain brake Fuel Fuel mixture + AVOID SKIN AND EYE CONTACT Chain oil Refuelling FOLLOW THE SAFETY PRECAUTIONS ON PAGE 8! waste oil AVOID SKIN AND EYE CONTACT Important note on bio-degradable chain oils: 1 2 Checking the chain lubrication Starting the engine Cold start: Warm start: Stopping the engine Checking the safety chain brake Adjusting the carburetor MAINTENANCE Sharpening the saw chain (0.64 mm) min. Files and how to work with them 4/5 30 Cleaning the brake band and sprocket interior Cleaning the guide bar, lubricating the sprocket nose 3 5 46 1 2 Cleaning the air lter Replacing the saw chain Replacing the fuel lter Replacing the spark plug .020 " Checking the ignition spark Replacing / cleaning the spark arrester screen Instructions for daily and periodic maintenance Service, spare parts and guarantee Maintenance and repair Spare parts Troubleshooting Guarantee Extract from the spare parts list PS-34 Page RE Y Page Mesures de scurit respecter par les utilisateurs de trononneuses Mesures de scurit supplmentaires Mesures gnrales de scurit Description des symboles gurant sur les trononneuses: ANSI B175.1-1991 Lutilisateur Quels vtements porter? 3 4 La trononneuse Utilisation de la trononneuse Instructions dutilisation de la trononneuse 8 Rglages importants 7 Conditions de travail Instructions de coupe Cho c de re cul 9 12 10 11 Pour viter le choc de recul 13 Afftage des plaquettes de coupe de la chane: Pour viter le recul Le recul: Techniques de coupe Abattage Instructions dabattage: 45 23 19 17 18 Mthode de coupe en plonge 24 28 25 26 Dbitage 29 32 30 31 33 34 35 Entretien et rparation Entretien et stockage de la trononneuse Page Caractristiques techniques PS-34 Combinaisons autorises de guides et de chanes Montage du guide et de la chane de sciage MISE EN ROUTE A TTENTION: 3 813 8 12 8 10 G H Tendre la chane de sciage Contrle de la tension de la chane Retendre la chane de sciage Frein de chane Carburants + Mlange carburant Stockage de carburants Huile de chane de sciage Remplissage des rservoirs Huile Usage 1 2 Vrier le graissage de la chane Dmarrer le moteur Dmarrage froid: Dmarrage chaud: Arrter le moteur Vrier le frein de chane Rglage du carburateur TRAVAUX DE MAINTENANCE Afftage de la chane de sciage (0,64 mm) min. Lime et guidage de la lime 4/5 30 Nettoyer lintrieur de la bande de frein de chane et de la roue chane 1 2 3 5 46 Nettoyer le guide de la chane, regraisser ltoile de dviation Remplacement de la crpine daspiration Nettoyage du ltre air Nouvelle chane de sciage Remplacement de bougie 0,5 mm Vrication de ltincelle dallumage Changement / nettoyage du pare-tincelles Indications de maintenance et dentretien priodiques Service datelier, pices de rechange et garantie Maintenance et rparations Pices de rechange Garantie Recherche de pannes Extrait de la liste des pices de rechange PS-34