INSTALLATION INSTRUCTIONS
FOR
3307896.005 REFRIGERATOR HINGE REPAIR KIT (Beige)
and
3307910.004 REFRIGERATOR HINGE REPAIR KIT (Black)
KIT CONTAINS:
(1) | 3307888.002 | Hinge Plate, RH Top/LH |
| 3307886.006 | Hinge Plate, RH Top/LH |
(1) | 3307889.000 | Hinge Plate, LH Top/RH Btm- Blk or |
| 3307887.004 | Hinge Plate, LH Top/RH |
(2) | 2931171066 | Bushing, Black or |
| 2931171041 | Bushing, Beige |
(3) | Screw, #4x0.75 Philips PH | |
(1) | 33078997.003 | Installation Instructions |
INSTALLATION INSTRUCTIONS
1.Remove refrigerator door(s)(Refer to Owners Manual for detailed instructions on this procedure).
2.Examine the broken area to determine if hinge kit will properly repair the hinge. A substantial amount of the door hinge socket must be remaining to hold the bush- ing or the repair kit will not allow the door to properly align. See FIG. 1 and FIG. 1A.
FIG. 1 | FIG. 1A |
Small chip | Small chip |
out of | out of |
Hinge | Hinge |
3.If the door hinge socket is broken in a way that the bushing cannot be held by the hinge, the entire door must be replaced. See FIG. 2 and Fig. 2A.
FIG. 2 | FIG. 2A |
| Front Half of |
| Door Hinge |
Large | Socket Missing |
| |
Crack |
|
REVISION:
Form No. 3307897.011 4/02 (Replaces 3307897.003) (French 3307898.019) ©2002 Dometic Corporation LaGrange, IN 46761
This Kit is applicable for the following refrigerator
models: |
|
|
NDR1062 | NDR1292 | NDR1492 |
RM1272 | RM1282 | RM2652 |
RM2852 | RM3662 | RM3663 |
RM3862 | RM3863 |
|
4.Locate the correct Hinge Plate in the contents of the kit. Fit the bracket on the broken hinge. Place the bush- ing in the hinge to properly center the Hinge plate on the broken hinge. Use a scratch awl to mark the loca- tion for the screws. See FIG. 3.
Use Hinge Plate | FIG. 3 |
For Template |
|
Use Scratch Awl to
Mark Hole Locations
5.Predrill three 3/32” holes into the door hinges as marked in step 4.
6.Place new bushing in the door hinge socket. Put the hinge plate in place and install the three #4x3/8” screws.
7.