OPERATING AND INSTALLATION INSTRUCTIONS FOR RM 2355, RM 2455, RM 2555 & RM 4605
INTRODUCTION
We are pleased that you have chosen this refrigerator and hope you will derive much satisfaction from using it.
The refrigerator is designed for installation in motorhomes and intended for storage of foods, frozen foods and making ice. It comes with Automatic Energy Selector (AES) which controls operation and energy supply. To put the refrigerator in opera- tion, just trip the main switch - AES manages the rest.
Read this manual very carefully before using the refrigerator. Make sure to retain it for future reference. In this manual you will find information on how to install, operate and maintain your new appliance. To ensure good refrigeration and economi- cal operation, the refrigerator has to be installed and used as described in these instructions.
The installation must be performed by an authorised person and in accordance with the manufacturers installation instruc- tions, local gas fitting regulations, municipal building codes, electrical wiring regulations, AS5601 “Gas Installations” and any other statutory regulations.
TRANSIT DAMAGE
Before you install your refrigerator, ensure to remove all protective packaging. Check for any damage or marks. Transit damage must be reported to whoever is responsible for delivery not later than seven days after the refrigerator was delivered.
DATA PLATE
Check the data plate, inside the refrigerator, to ensure that you have received the right model.
Below you can make a note of the details stated on the data plate. It is a good idea to this since this information is needed if you have to contact service personnel. The data plate contains e. g. the following details:
CONTENTS
OPERATING INSTRUCTIONS | 4 |
CONTROL PANEL | 4 |
AES | 4 |
STARTING THE REFRIGERATOR | 4 |
LP GAS OPERATION | 4 |
4 | |
12V OPERATION | 4 |
SWITCHING BETWEEN ENERGY SOURCES | 5 |
REGULATING THE TEMPERATURE | 5 |
TRAVEL CATCH | 5 |
USING THE REFRIGERATOR | 5 |
DEFROSTING | 5 |
CLEANING THE REFRIGERATOR | 6 |
REPLACING THE BULB | 6 |
HEATING CABLE | 6 |
TURNING OFF THE REFRIGERATOR | 6 |
PRODUCT CARE - SOME USEFUL HINTS | 6 |
TROUBLESHOOTING | 6 |
MAINTENANCE | 7 |
SERVICE AND SPARE PARTS | 7 |
Model designation | RM |
Product number |
|
Serial number |
|
Voltage | 230 - 240 volts |
Gas pressure | 2,70 kPa |
INSTALLATION INSTRUCTIONS | 7 |
VENTILATION OF THE UNIT | 7 |
CONNECTING POINTS | 9 |
1 1 | |
SECURING THE REFRIGERATOR | 1 1 |
DRAIN WATER HOSE | 1 2 |
CONNECTIONS | 1 2 |
MOUNTING INSTRUCTIONS | 1 3 |
TECHNICAL DATA | 1 6 |
REARVIEW EQUIPMENT | 1 7 |
WIRING DIAGRAM | 1 8 |
WORKING INSTRUCTIONS FOR | 1 9 |
THE GAS SAFETY SYSTEM | |
APPENDIX A - AIRING POSITION CARD | 20 |
3
