Dover Finishing Products 2510, 2210, 2200, 2020, 2220, 2500, 2520 manual Foreword, Introduction, Safety

Foreword

The Installation Manual and Operators Instructions must accompany this appliance. As well as instructions for installation and information about use, you will also find advice concerning safety and maintenance.

Please read this booklet carefully before installation and before firing the unit. Save this booklet and pass to any subsequent user who can also profit by it.

1.Introduction

Your DOVRE purchase has made you the owner of a high quality product that sy m- bolizes a new generation of energy -saving and ecologically safe heaters, producing convection heat as well as radiant heat with optimum efficiency. Through the appli- cation of a revolutionary combustion concept DOVRE heaters achieve astonishing results in full compliance with strict environmental and safety norms. Also, you will be enjoying the lovely sight of the fire blazing in the stove.

Our heaters are produced in accordance with ISO 9002, using state -of-the -art pro- duc tion means.

In the unlikely event of a malfunction, you can always rely on DOVRE’s after-sales service. Any unauthorised modific ation of the appliance is forbidden and use only replacement parts recommended by the manufacturerr.

This heater is designed to be installed in a living room and to be hermetically con- nected to a flue (chimney).

If the stove is professionally installed, connected to a well-functioning chimney and sufficiently ventilated, you can take the long-term and trouble -free functioning of your heater for granted.

Please consult an expert when installing and connecting the heater. The manufac- turer cannot be held liable for problems caused by faulty installation.

2.Safety

The heating unit is best installed, commissioned, and checked by a competent in- staller who is aware of national and local legislation.

The heater is designed to heat a room, which means that all surfaces, including the front glass, can get very hot (> 100 °C).

Please do not place any curtains, clothes, laundry, furniture or other combustible materials on or near the heater.

It is advised to make a fire in the stove with the highest possible intensity right after it is installed, so as to cure the heat-resistant paint finish. This may involve some odour production, which will however disappear after a while.

It is necessary to maintain and regularly clean the stove and the chimney for the stove to function safely and for a long period of time. Please follow the cleaning in- structions in the chapter concerned.

In case of a chimney fire, immediately close all air intake vents of the appliance and alert the fireman.

Broken glass should be replaced before using the heater again.

The stove is specifically designed for burning certain kinds of fuels. In the technical specifications under cover you can find detailed information concerning this topic. It is absolutely prohibited to burn fuels other than these, as this may damage your heater. Moreover, it is ecologically harmful.

2020/2220/2520/2210/2510/2200/2500 3 03.27883.100