Draper WH ST 400, WFH ST 2000, WH 3D Page 2 of, Exclusive Keystone Mounting Bracket-to-Mount

SMS Flatscreen Wall Mounts for Plasma Displays by Draper Page 2 of 4

Specifications—SMS Flatscreen Wall Mounts for Plasma Displays

SMS Flatscreen Wall Mounts for Plasma

Displays, model (WH 3D/WH T 2/WH ST 400/WH ST 1150/WFH ST 2000/WH ST), by Draper, Inc., of Spiceland, Indiana.

Universal Plasma Bracket: shall be provided for any plasma display through 50" diagonal and under 100 lbs. Bracket shall be of steel, with anodized aluminum fi nish, and shall feature keystone-shaped mounting panel which will slide into steel mating bracket on SMS Flatscreen Mounts for easy, safe and sturdy mounting. Universal Plasma Bracket to have both landscape and portrait orientation capabilities. Hardware for attaching bracket to plasma display provided by Draper—a full set of screws, washers, extenders, spacers, Extension Plates and Extension Arms to fit virtually any plasma model. Universal bracket shall be compatible with all SMS Flatscreen Mounts for Plasma Displays.

Plasma-specific Bracket: shall be provided for any plasma display over 50" diagonal and over 100 lbs. Bracket shall be of steel, with anodized aluminum

finish, and shall feature keystone-shaped mounting panel which will slide into steel mating bracket on all SMS Flatscreen Mounts for easy, safe, and sturdy mounting. Hardware for attaching bracket to plasma display provided by Draper. Bracket shall be compatible with all SMS Flatscreen Mounts for Plasma Displays.

WH T 2: Extremely low profi le, protruding approximately 1" from wall. Wall mount and tilting mechanism shall be of steel, with anodized aluminum

finish. Unit shall be securely attached to mounting surface using two angles, spaced so that fasteners are 16" apart on center. Tilting mechanism shall feature mating bracket to accept mounting panel of Draper’s keystone-shaped slide on Universal Plasma Bracket or plasma-specific mounting bracket. Unit shall allow 10º tilt, and feature a safety lock to keep plasma display in place. Tilting mechanism shall also lock into place for non-tilting installations. Will accommodate virtually any display up to 330 pounds.

WH 3D: Articulating wall mount collapses to depth of 4" (minus plasma display and bracket). The articulating arm extends the display up to 26" from wall, and allows swivel left and right as far as the wall will allow. Mating bracket to accept mounting panel of Draper’s keystone-shaped slide on Universal Plasma Bracket or plasma-specifi c mounting bracket. Display can be tilted 10°. Will accommodate virtually any display up to 100 lbs.

WH ST: Swiveling wall mount shall be of steel, with anodized aluminum

finish, and shall be attached to mounting surface using steel mounting plate, allowing bracket to swivel approximately ±90º (depending on size of plasma display). Steel tilting mechanism shall feature mating bracket to accept mounting panel of Draper’s keystone-shaped slide on Universal Plasma Bracket or plasma-specifi c mounting bracket. Unit shall allow 15º tilt and 360º rotation, and feature safety screws to keep plasma display in place. Will accommodate virtually any display up to 165 pounds.

WH ST 400: Wall mount shall be extruded aluminum pillar, with anodized aluminum fi nish. Pillar shall be securely attached to mounting surface using two steel mounting plates. Steel tilting mechanism shall feature mating bracket to accept mounting panel of Draper’s keystone-shaped slide on Universal Plasma Bracket or plasma-specific mounting bracket. Display can be mounted horizontally or vertically. Unit shall allow 15º tilt and 20º rotation, and feature safety screws to keep plasma display in place. Will accommodate virtually any display up to 330 lbs.

WH ST 1150: Wall mount shall be extruded aluminum pillar with anodized aluminum fi nish. Pillar shall be securely attached to mounting surface using two steel mounting plates. Steel tilting mechanism shall feature mating bracket to accept mounting panel of Draper’s keystone-shaped slide on Universal Plasma Bracket or plasma-specific mounting bracket. One or two displays can be mounted horizontally or one can be mounted vertically. Unit shall allow 15º tilt and 20º rotation, and feature safety screws to keep plasma display in place. Display can be raised or lowered up to 33½" in 2" increments. Discrete cable track located on sides of support pillar. Will accommodate virtually any display up to 330 lbs.

WFH ST 2000: Wall/Floor mount shall be pillar of extruded aluminum, with anodized aluminum fi nish. Pillar shall be securely attached to wall and fl oor using two steel mounting plates. Steel tilting mechanism shall feature mating

bracket to accept mounting panel of Draper’s keystone-shaped slide on Universal Plasma Bracket or plasma-specifi c mounting bracket. Up to three displays can be mounted horizontally or up to two can be mounted vertically, depending on display sizes. Unit shall allow 15º tilt (except when more than one display is mounted) and 20º rotation, and feature safety screws to keep plasma in place. Discrete cable track shall be located on sides of support pillar. Will accommodate virtually any display up to 660 pounds (total weight of all displays).

Options: Universal Plasma Bracket fi ts plasma displays through 50" diagonal. Shelves for mounting DVD, VCR, videoconferencing camera or other accessories above or below plasma display optionally available with WH ST 1150 & WFH ST 2000. Available in grey or black. Shelves can be raised or lowered in 2" increments. SMS Security Lock Kit allows plasma displays to be secured to SMS Flatscreen Mount for Plasma Displays; kit includes adhesive pad, (2) loopers, 6' cable and key lock. SMS FPD Adapter allows you to use plasma mounts for LCD/TFT flat panel displays.

Exclusive Keystone Mounting Bracket-to-Mount

Exclusive Universal Plasma Display Bracket

FPD Adapter (for mounting Flat

Panel Displays)

www.draperinc.com (765) 987-7999