V
V
I 
Trunk Support
Item # TK 1080 S, TK 1080 M & TK 1080 L
Install mounting bracket and post directly behind the uprights. Loosen knobs (V) on the post and slide chest prompt rods into the post at desired position. Tighten knobs.
Trunk support adjustments
The trunk support has two adjustable straps and buckles on each side. The front of the trunk support also has a restraining loop to keep the pads together. Each strap is independently adjustable to adjust the size, fit and angle of the trunk support.
Height - Push in button (I) and slide post to desired posi- tion. Release button and move post until it clicks into place.
Width – Trunk support can be placed closer or farther from the user by
•Loosening knobs (V) and sliding the trunk support outward or inward.
•Place mounting bracket with the clamp facing towards the outside or inside of the handlebar
Depth – Reposition mounting bracket on handlebar.
Rotation – Loosen knobs (V) and tilt trunk support to desired position. Tighten knobs.
Y
W
X
Thigh Prompts
Item #s TK 1090 S & TK 1090 L
Install thigh prompt clamps on handlebar. It is advisable to mount them behind the trunk support.
Thigh prompt adjustments
Height – Loosen knob (W) and slide thigh pad (X) up or down to desired position. Tighten knob.
Width – Thigh pads can be placed closer or farther from the user by
•Loosening knob (Y), adjust thigh pads inward or outward and tighten knob
•Place mounting bracket with the clamp facing towards the outside or inside of the handlebar.
Depth - Reposition mounting bracket on handlebar.
Rotation – Loosen knob (W), rotate the thigh pad and tighten knob.
