2.3CHIMNEY CONNECTOR

Your chimney connector (commonly called stove pipe) and chimney must have the same diameter as the stove’s exhaust outlet. The stove pipe must be made of aluminized or cold roll steel with a minimum 24- gauge thickness (0.021" or 0.53 mm). It is strictly forbidden to use galvanized steel.

The following recommendations may be useful for the installation of your chimney connector:

Your chimney connector should be assembled in such a way that the male end (crimped) faces down to prevent creosote dripping outside the joints. Attach each of the sections to one another with three equidistant metal screws. Also use three equidistant metal screws to attach the connector to the stove’s exhaust collar. See Figure 2.3 (A) and Figure 2.3 (B).

The pipe must be short and straight. All sections installed horizontally must slope at least ¼ inch per foot, with the upper end of the section toward the chimney. See Figure 2.3 (B).

To insure a good draft, the total horizontal length of the connector should never exceed 8' to 10' (2.4 to 3.04 m). In the case of vertical installation, the total length of the connector can be much longer and connected without problem to the chimney at the ceiling level.

There should never be more than two 90 degrees elbows in the whole connector and chimney system. Never start with a 90o elbow. Always go up vertically for at least 2 feet from the flue spigot before using a 90o elbow.

The connector must not pass through any combustible material, nor may it pass through a concealed space (such as an attic, roof space, or closet). If passing through a wall, ceiling, or into a masonry chimney, use either chimney components listed for that specific use, or means acceptable to local authorities having jurisdiction over the installation.

Installation of a "barometric draft stabiliser" (fireplace register) on a connector is prohibited.

Furthermore, installation of a draft damper is not recommended. Indeed, with a controlled combustion wood stove, the draft is regulated upon intake of the combustion air in the stove and not at the exhaust.

FIGURE 2.3 (A) Connecting Sections

22

Page 23
Image 23
Drolet ULC S627, UL 1482 owner manual Chimney Connector, A Connecting Sections

UL 1482, ULC S627 specifications

The Drolet ULC S627 is a highly regarded wood stove designed for efficiency and performance in residential spaces. This model not only meets but exceeds the stringent criteria set by UL 1482 standards, which ensure quality and safety in wood-burning appliances. The S627 represents a blend of traditional craftsmanship and modern technology, making it ideal for homeowners seeking an effective heating solution.

One of the standout features of the Drolet ULC S627 is its impressive heating capacity. With the ability to warm areas of up to 2,000 square feet, it is suitable for medium to large-sized rooms. This makes it an excellent choice for users looking to heat an open floor plan or a cozy cabin. The stove's robust construction and design help to retain and radiate heat efficiently, allowing for a consistent warmth that enhances comfort during colder months.

The S627 employs advanced combustion technology, which allows for cleaner and more complete burning of wood. This results in higher efficiency, translating to reduced wood consumption and lower emissions. The addition of a secondary combustion system ensures that any remaining gases and particulates are burned off, contributing to a cleaner burn. This feature not only complies with environmental regulations but also allows for longer burn times, making it a practical choice for users who prefer less frequent refueling.

Ergonomics is another aspect where the Drolet ULC S627 excels. The stove is designed with a user-friendly door that provides easy access to the firebox for loading wood and cleaning ash. The large glass window allows users to enjoy the mesmerizing visual of the fire while ensuring heat is efficiently radiated into the room. The clean-out system is also conveniently placed to simplify maintenance.

Aesthetic versatility is another highlight of the Drolet ULC S627, as its timeless design allows it to fit into various interior décors. Available in classic black or elegant enamel finishes, it can complement a rustic or modern setting. This blend of functionality and aesthetic appeal makes the stove a focal point within living spaces.

In summary, the Drolet ULC S627, with its strong adherence to UL 1482 standards, offers homeowners an efficient, clean, and visually appealing wood-burning solution. Its impressive heating capabilities, advanced combustion technologies, and thoughtful design make it a compelling choice for those looking to enhance their home heating experience.