DC265 / DC365 INSTALLATION
Installation Tips
Parallel or series wiring is not recommended for these speakers. The speakers should only be connected to receivers with 4-8 ohm amplifier loading. Avoid parallel or series wiring your Dual speakers with any other speaker type or brand.
Always connect speaker wires using the correct polarity. Speaker wires are marked for polarity consistency so that you can determine the positive and negative identity of the individual wires within the molded pair insulation. Polarity is shown by either a color stripe on the insulation, by ridges molded into one side of the insulation, the color of the insulation case around the wire, or by the color type or colors of the wires/wire itself (copper or silver).
Important: In order to maintain correct polarity, always connect speaker wire using the positive (+) terminal on the receiver to the positive (+) wire, and the negative
6