DS SERIES INSTALLATION
Mounting
1.Determine where the speakers will be mounted. Make sure the area
is large enough for the speaker to mount evenly. Also ensure the mounting location is deep enough for the speaker to fit.
2. Refer to the specification chart to determine the proper diameter hole to cut for your speaker model.
3. If needed, use the grille as a template to mark the locations for the mounting screws. Drill the holes with a 3/32" bit.
4.Be sure to observe proper polarity when connecting the wires. The speaker's positive terminal is indicated with a "+" symbol.
5.Fit the speaker to the hole
is to be used, insert 4 screws into the grill holes and then mount the speaker.
4
