DMP65 INSTALLATION
Preparation/Installation
Please read entire manual before installation.
Before You Start
•Disconnect negative battery terminal.
(consult a qualified technician for instructions)
•Use extreme caution when drilling holes to avoid damaging fuel lines, hydraulic lines or existing wiring.
Getting Started
•Determine where the speakers will be mounted. Ensure an area large enough for the speaker to mount evenly. Be sure the mounting location is deep enough for the speaker to fit.
•Using an appropriate tool, cut a 5.13" diameter mounting hole. Route speaker wires and connect to speakers, observing speaker polarity.
•Install speaker into opening using supplied hardware and test for correct operation.
TYPICAL MOUNTING METHOD
2
