SBP10 PREPARATION
Getting Started
Thank you for purchasing the Dual Electronics SBP10 Bandpass Subwoofer System. Although Dual has attempted to ensure the information in this manual is accurate, please be aware that any part of it is subject to change without notice.
Safety
!CAUTION
THE FOLLOWING INSTRUCTIONS ARE DESIGNED TO ENSURE SAFETY DURING INSTALLATION AND USE OF THE SBP10. FAILURE TO HEED THESE INSTRUCTIONS CAN RESULT IN INJURY OR DAMAGE TO THE UNIT.
•To prevent injury and damage to the unit, please read and follow the instructions in this manual.
•If you feel unsure about installing this system yourself, have it installed by a qualified audio technician.
•Before installation, disconnect the battery negative
•Do not connect amplifier or any audio source to illumination inputs. These inputs are designed for 12 volt power only.
•Illuminite inputs are designed for 12 volt DC power source only. Do NOT connect your illuminite product directly to your battery permanently, as it will cause your battery to discharge. Please use a switched 12 volt source.
2
