SBP8A PREPARATION

Getting Started

Thank you for purchasing the Dual SBP8A 8" Bandpass Enclosure with built-in Amplifier. Although Dual has attempted to ensure the information in this manual is accurate, please be aware that any part of it is subject to change without notice.

Please read entire manual before installation. Due to the technical nature of amplifiers, it is highly recommended that your Dual SBP8A is installed by a professional installer or an authorized dealer.

Before You Start

 Always disconnect the negative battery terminal. Consult a qualified technician for instructions if you are unsure.

 Avoid installing the amplifier where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration.

• Use extreme caution when drilling holes to avoid damaging fuel lines or existing vehicle wiring.

 All amplifier installations require power, signal and speaker wires (not included).

• An amplifier installation kit (sold separately) is highly recommended to facilitate the installation. Consult your dealer for recommendations.

Mounting Location

• Choose a mounting location for the SBP8A. Suggested locations include behind a seat or in the trunk.

• The SBP8A can be mounted horizontal (recommended) or vertical. For optimum performance, make sure to provide at least 1" of space around all sides of the amplifier.

Do not mount the SBP8A under carpets or where airflow is restricted.

 Do not install the SBP8A where it may be exposed to moisture.

 The optimum mounting location varies between vehicles. Remember to test all amplifier functions before completing the final mounting procedure.

2

Page 2
Image 2
Dual SBP8A owner manual Getting Started, Before You Start, Mounting Location