Troubleshooting General, Problem Cause Action

X2DMA400 OPERATION

Troubleshooting - General

Problem	Cause	Action

	Yellow wire not connected or incorrect	Check connections for proper
Unit will not turn on	voltage Red wire not connected or	Check connections for proper
	voltage Red wire not connected or	voltage (11~16VDC)
	incorrect voltage	voltage (11~16VDC)
(no power)	incorrect voltage
(no power)	Black wire not connected	Check connection to ground
	Black wire not connected	Check connection to ground
	Fuse blown	Replace fuse
	Speaker wires not connected	Check connections at speakers
Unit has power	One or more speaker wires touching	Insulate all bare speaker wires
(but no sound)	One or more speaker wires touching	from each other and chassis
	each other or touching chassis ground	ground
		ground
	Yellow or red wire touching chassis	Check for pinched wire
	ground	Check for pinched wire
Unit blows fuses	ground
Unit blows fuses	Speaker wires touching chassis ground	Check for pinched wire
	Speaker wires touching chassis ground	Check for pinched wire
	Incorrect fuse rating	Use fuse with correct rating
PROTECT appears	The WMA file is copy-protected by DRM	Write disc using WMA files that
on display	(Digital Rights Management)	are not copy-protected
NO FILE appears	Selected file is not available in direct or	Repeat search using valid
on display	alphanumeric search modes	parameters
NO SUPPORT appears	An invalid ID3 tag version is present	Version 1.0 to 2.4 ID3 tags are
on display	An invalid ID3 tag version is present	supported.
on display		supported.