Dual XD7500 AUD, AUD, BAS, AUD, TRE, AUD, BAL, AUD, FAD, AUD, Bass, Mute, DISP, TUNE, DISP, DISP, TUNE, DISP, MODE, MUTE, MUTE, Reset, Audio, Fader, RESET, Treble

XD7500 OPERATION

Programmable Display Priority

Programmable Clock Priority

ResetAudioBassTrebleBalanceFaderSource Audio MemoryConfirmation BeepMute

General Operation

Press and hold DISP then press TUNE llto select radio frequency (tuner mode) or CD elapsed time/track (CD player mode) display priority (default). Clock is accessed by pressing DISP momentarily.

Press and hold DISP then press TUNE nnto select clock display priority. Radio frequency or CD elapsed time/track is accessed by pressing DISP momentarily.

Programs unit to display clock/no clock when unit is off. Press and hold MODE then press PRESET 1 to turn clock priority on/off.

Press and hold for more than 2 seconds to RESET the unit upon initial installation or if abnormal operation occurs.

Press AUD to select between Volume (default), Bass, Treble, Balance & Fader.

Press AUD until BAS appears Rotate encoder left/right to adjust (+6 maximum / -6 minimum)

Press AUD until TRE appears Rotate encoder left/right to adjust (+6 maximum / -6 minimum)

Press AUD until BAL appears Rotate encoder left/right to adjust

(BAL.L 12-BAL 00-BAL.R 12) BAL 00 represents equal balance.

Press AUD until FAD appears Rotate encoder left/right to adjust

(FAD.F 12-FAD 00-FAD.R 12) FAD 00 represents equal fader.

Individual Bass and Treble settings are retained in memory for AM/FM and CD/AUX modes.

Press AUD for 3 seconds to turn confirmation beep on/off.

Press MUTE to silence the audio. Press MUTE again to cancel.

7