Dual XDM7610 owner manual General Operation Audio Settings

XDM7610 OPERATION

General Operation - Audio Settings

Audio

Bass

Treble

Balance

Fader

Subwoofer

Source Audio Memory

Reset

Press AUDIO momentarily to select between Volume (default), Bass, Treble, Balance, Fader & Subwoofer.

VOLUME BASSTREBLEBALANCEFADERSUBWOOFER

Press AUDIO until BAS appears then rotate encoder left/right to adjust ( -6 minimum / +6 maximum).

Press AUDIO until TRE appears then rotate encoder left/right to adjust ( -6 minimum / +6 maximum).

Press AUDIO until BAL appears then rotate encoder left/right to adjust (BAL L 12-BAL 00-BAL R 12). BAL 00 represents equal balance

Press AUDIO until FAD appears then rotate encoder left/right to adjust (FAD F 12-FAD 00-FAD R 12). FAD 00 represents equal fader

Press AUDIO until SUB appears then rotate encoder left/right to adjust (SUB 00-SUB 12).

Individual Bass and Treble settings are retained in memory for AM, FM, CD, and AUX modes. This allows you to save the Bass and Treble settings separately for each mode.

Example:

FM tuner mode can have Bass +3 and Treble -1 while CD mode can have Bass +2 and Treble +2.

Note:

Any adjustment to the Bass or Treble settings automatically cancels the current EQ curve (if one is selected).

Press RESET upon initial installation or if abnormal operation occurs. Refer to page 4 for the reset button location.

8