Dual XDMA7715 owner manual General Operation, Preset EQ Curves Display Set the Clock

XDMA7715 OPERATION

General Operation

Front Panel Note:

Front Panel Removal

Power On/Off

Mode

Volume

Programmable Turn-On Volume

Preset EQ Curves

Display

Set the Clock

The front panel is semi-permanently attached during assembly. Please refer to the separate yellow instructions (before installation) to make the front panel removable.

With the unit off, press EJECT to allow the front panel to slide down. Gently squeeze the release tab located on the bottom center underside and pull front panel down and away from unit to remove. To install, insert left side first, then push right side to secure.

Press POWER or any other button (except EJECT or OPEN) to turn the unit on. Inserting a disc will turn the unit on automatically. Press POWER to turn the unit off.

Press MODE to select between AM/FM, CD player, auxiliary input and Bluetooth (optional). Modes of operation are indicated in the display.

Note: CD and Bluetooth modes will not appear unless a CD is inserted or BTM60 (Bluetooth module) is attached.

Adjust volume using rotary encoder (00-46).

Press and hold POWER for 3 seconds to program currently selected volume level. "P-VOL" and the current volume level will momentarily appear in the display.

Press EQ to select between POP, JAZZ, CLASSIC, BEAT, ROCK and OFF (default) equalization curves. Any adjustment to the Bass or Treble settings automatically cancels the current EQ curve (if one is selected).

When in AM/FM, CD, or AUX mode:

Press DISP to select between clock and radio frequency (tuner mode), clock and CD elapsed time/track (CD mode or clock and AUX (AUX mode).

With the unit on, press and hold DISP until the clock begins to flash, then release. Press TUNE nnto adjust the hours and TUNE llto adjust the minutes. Press DISP momentarily to save the selected time.

6