XDVD8183 OPERATION
Control Locations - Monitor Closed
1 | 2 | 3 | 4 | 5 |
6
17 | 16 | 15 | 14 | 13 | 12 |
| 11 | 10 | 9 | 8 | 7 |
| 1 | Band |
|
|
| 10 | Chapter/Track Down/Seek Down | ||||
| 2 | Auto Store/Preset Scan |
| 11 | Stop |
|
|
|
| ||
| 3 | Secondary LCD |
|
| 12 | Play/Pause |
|
|
| ||
| 4 | Display |
|
|
| 13 | Fast Forward/Manual Tune Up |
| |||
| 5 | Open/Close Monitor |
|
| 14 | Fast Reverse/Manual Tune Down | |||||
| 6 | Eject |
|
|
| 15 | Mute |
|
|
|
|
| 7 | Rotary Encoder/Enter |
| 16 | Power/Volume |
|
| ||||
| 8 | Mode |
|
|
| 17 | Microphone |
|
|
| |
9Chapter/Track Up/Seek Up
Monitor Notes:
•This model incorporates a motorized moving monitor. Before final installation, make sure the monitor will not obstruct the dash, shifter or any other controls.
•Upon installation, do not attempt to move the monitor up/down by hand. Use the ANGLE / and OPEN buttons on the front panel only.
•The unit will stop if it encounters any obstacles during the open/close sequence. If this occurs, remove the obstacle and press OPEN again to resume the monitor open/close sequence.
