Dual SBX693, XNP553, XNP653, XNP693, SBX653 Mounting, Location is deep enough for the speaker to fit

XNP - SBX SERIES INSTALLATION

Mounting

1.Determine where the speakers will be mounted. Ensure an area large enough for the speaker to mount evenly. Be sure that the mounting

location is deep enough for the speaker to fit.

2.Refer to the specification chart to determine the proper diameter hole to cut for your speaker model.

3.If supplied, use the plastic mounting ring as a template to mark the

locations for the mounting screws. Drill the holes with a 1/8" bit.

4.Be sure to observe proper polarity when connecting the wires.

The speaker's positive terminal is indicated with the “+” symbol.

5. Fit the ring and speaker to the cut-out. Mount them using the enclosed screws. If supplied, fit the grille inside the ring and press gently, but firmly, into place and attach with screws.

5