Ducane 20211710 manual  Warning Never USE AN Open Flame to Test for GAS Leaks

6www.ducane.com

Important

WHEN CONNECTING OR REPLACING ANY GAS PIPE FITTINGS, ALL JOINTS MUST BE SEALED WITH A JOINT COMPOUND (PIPE DOPE) THAT IS RESISTANT TO THE ACTION OF (LP) GASES.

9.FOR NATURAL AND SYSTEM LP GRILLS. Install the Natural Gas (or System LP) regulator/hose assembly on to the grills manifold supply pipe. To make the connection, pull back the outer sleeve of the socket connector, (at the end of the regulator/hose assembly), and insert all the way the male plug connection, (on the grills manifold), and then release the outer sleeve of the socket connector. This will produce a gas joint. After making gas connections, check all joints for leaks using soapy water and a brush. See Owner’s Guide for more on Natural Gas (or System LP) installation.

9.

____________________________________________________________________

WARNING: NEVER USE AN OPEN FLAME TO TEST FOR GAS LEAKS.

____________________________________________________________________

10.Assemble the side shelf frame using four (4) #8 x 1 1/2 Phillip’s flat head screws (a-c). Depending whether your model has one or two side shelves, attach the side shelf to either or both sides of the burner box, using four (4) 1/4 x 1 1/4" black screws, 1/4-20 nuts, and stainless steel shelf support washers (oval, with two holes). The washers should go on the inside of the burner box with the raised rib side facing away from the surface of the burner box (d). The nuts go on the inside of the burner box. Tighten all four nuts securely (e).

10. (a) 10. (b)