Chapter 1 Precautions

Always follow these safety instructions when setting up and using the Digital Presenter:

1.Do not place the Digital Presenter on an unstable trolley, stand or table.

2.Do not use the Digital Presenter near water or source of heat.

3.Use attachments only as recommended.

4.Use the type of power source indicated on the Digital Presenter. If you are not sure of the type of power available, consult your dealer or local electricity company for advice.

5.Place the Digital Presenter where it can be easily unplugged.

6.Always take the following precautions when handling the plug. Failure to do so may result in sparks or fire.

„Ensure the plug is free of dust before inserting it into a socket.

„Ensure that the plug is inserted into the socket securely.

7.Do not overload wall sockets, extensions leads or multi-way plug boards as this may cause fire or electric shock.

8.Do not place the Digital Presenter where the cord can be stepped on as this may result in fraying or damage to the lead or the plug.

9.Unplug the projector form the wall socket before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners.

10.Do not block the slots and openings in the case. They provide ventilation and prevent the Digital Presenter from overheating. Do not place the Digital Presenter on a sofa, rug or other soft surface or in a built-in installation unless proper ventilation is provided.

11.Never push objects of any kind through slots. Never allow liquid of any kind to spill into the Digital Presenter.

12.Except as specifically instructed in this User’s Manual, do not attempt to operate this product by yourself. Opening or removing covers may expose you to dangerous voltages and other hazards. Refer all servicing to licensed service personnel.

13.Unplug the Digital Presenter during thunderstorms or if it is not going to be used for an extended period, do not place the Digital Presenter or remote control on top of heat-emitting equipment or heated objects such as a car and etc.

14.In the following situations, unplug the Digital Presenter from the wall outlet and refer servicing to licensed service personnel:

„If the power cable or plug becomes damaged or frayed.

„If liquid is spilled into it or the Digital Presenter has been exposed to rain or water.

3