Dukane 28A8755A, 28A8049A user manual Option Menu, Volume, Auto OFF, Whisper

MULTIFUNCTIONAL SETTINGS (continued)

OPTION Menu

With the OPTION menu, the five items shown in the Table below can be performed.

Please perform each operation in accordance with the instructions in the Table.

MENU

MAIN	VOLUME
PICTURE-1	AUTO OFF
PICTURE-2	WHISPER
INPUT	LAMP TIME
SCREEN	FILTER TIME
OPTION

12

: SELECT

Example : OPTION Menu

(VOLUME)

OPTION Menu

Item			Description
VOLUME	Adjust Volume: High		Low
	Adjust AUTO OFF Time:
AUTO OFF	Long (MAX. 99 min.)		Short (Min. 1 min.)	(DISABLE: 0 min.)
	The system automatically enters the standby mode if no signal is received
	within the set time. This function is inactive when DISABLE (0 min.) is selected.
	Select WHISPER Mode:
WHISPER	NORMAL	WHISPER
	When WHISPER is selected the WHISPER mode is activated. In the WHISPER
	mode, acoustic noise and screen brightness are reduced.
	Refer to LAMP TIME: When set, this function displays the total time the
	projector lamp has been used since new.

Reset LAMP TIME [Use this function only when the lamp has been replaced!]:

Depress the RESET button for at least 3 seconds while lamp time is being displayed. The reset menu will then appear. After you replace the lamp with a

LAMP TIME new lamp, select RESET on the menu with the button.

•Do not reset the lamp time unless you have replaced the lamp. And, always reset the lamp time when replacing the lamp. The message functions will not operate properly if the lamp time is not reset correctly.

•Before replacing the lamp, carefully read the descriptions headed "THE LAMP".

Refer to FILTER TIME: This function displays the total time the air-filter has been used since new.

Reset FILTER TIME [Use this function only when the filter is cleaned or replaced!]:

Depress the RESET button for at least 3 seconds while lamp time is being displayed. The reset menu will then appear. After you replace the filter, select

FILTER TIME RESET on the menu with the button.

DEFAULT CANCEL

•Do not reset the filter time unless you have cleaned or replaced the filter. And, always reset the filter time when cleaning or replacing the filter. The message functions will not operate properly if the filter time is not reset correctly.

•Before cleaning or replacing the filter, carefully read the descriptions headed "THE AIR FILTER".

6