Dukane 8053 Power Connection, Example of System Setup, Plug & Play, INSTALLATION continued

INSTALLATION (continued)

Power Connection

Use the correct power cord depending on the power outlet to be used.

Connect the AC inlet of the projector to the power outlet firmly by the power cord.

CAUTION • Be carful in handling the power cord according to instructions of the

accompanying manual "SAFETY INSTRUCTIONS" and this manual.

•Connect the power cord firmly. Avoid using a loose, unsound outlet or failed contact.

Power outlet

Power Cord AC Inlet

Example of System Setup

Display

Monitor

COMPONENT VIDEO
CR/PR	CB/PB	Y		DVI
DVD Player
		1	RGB IN	2

	S-VIDEO IN
AUDIO R	L VIDEO IN
IN
AUDIO 1	2 AUDIO OUT USB
IN
S-Video Tape	RGB OUT	CONTROL
Recorder

*DVI:CP-X430 only

Computer (notebook type)

Speaker with	Computer
amplifier	(desktop type)

NOTE • When connecting with a notebook computer, set the proper RGB external image output (setting CRT display or simultaneous display of LCD and CRT). Please read instruction manual of the notebook for more information.

Plug & Play

This projector is VESA DDC 1/2B compatible. Plug & play is possible by connecting to a computer that is VESA DDC (Display Data Channel) compatible.

Please use this function by connecting the RGB cable with RGB IN 1 terminal (DDC 1/2B compatible), or by connecting a DVI cable with DVI terminal (CP-X430 only/DDC 2B compatible). Plug & play may not operate by other connections.

NOTE • Plug & play is a system configured with peripheral equipment including a computer, display and an operating system.

•This projector is recognized as a plug & play monitor. Use the standard display drivers.

•Plug & play may not operate by the computer to connect. Use the RGB IN 2 terminal if plug & play does not operate correctly.

ENGLISH-8