Dukane 8755B user manual Input Menu, Auto, Video

MULTIFUNCTIONAL SETTINGS (continued)

INPUT Menu

With the INPUT menu, the four items shown in the Table below can be performed. With inputting of RGB IN 1 and RGB IN 2 signals, the horizontal and vertical frequencies of the signals will be displayed on the initial screen of the INPUT menu.

Perform each operation in accordance with the instructions in the Table.

MENU

MAIN	AUTO	EXECUTE
PICTURE-1	VIDEO
PICTURE-2	SYNC ON G
INPUT
SCREEN
OPTION

: SELECT

Example : INPUT Menu

(AUTO)

INPUT Menu

Item				Description
	Auto Adjust (for RGB): Automatically adjusts H POSITION, V POSITION, H
	PHASE, and H SIZE. Use this function with the maximum window size.
	Auto Adjust (for VIDEO/S-VIDEO):Automatically selects the proper VIDEO
	mode for the current input signal. This function is active only when the AUTO
AUTO	mode is selected for the item VIDEO. Refer to the description for the item
	VIDEO below.
	• This function may not be available with a PAL60 signal and certain other
	signals.
	• The AUTO mode operation requires approximately 10 seconds.
	Select Mode of Signal Type (for VIDEO/S-VIDEO):
	AUTO	⇔	NTSC	⇔	PAL	⇔	SECAM	⇔
	NTSC4.43	⇔	M-PAL	⇔	N-PAL
	Selecting AUTO mode activates and performs the AUTO function for VIDEO/S-
VIDEO	VIDEO. It automatically selects the proper mode from among those above.
	Use this function if the image becomes unstable with VIDEO/S-VIDEO. (e.g.
	The image becomes irregular, or lacks color.)

•AUTO mode may not function correctly with a PAL60 signal and certain other signals.

•The AUTO mode operation requires approximately 10 seconds.

On/Off SYNC ON G Mode:

TURN ON ⇔ TURN OFF

Selecting TURN ON turns on the SYNC ON G mode. The SYNC ON G mode

SYNC ON G allows reception of SYNC on G.

•In the SYNC ON G mode, the picture may be distorted with certain input signals. In such a case, remove the signal connector so that no signal is received and turn SYNC ON G off, and then reconnect the signal.

4