3. Web Control
3.1 Projector Web Control - Network Settings (continued)
|
|
| Item | Description |
|
|
|
|
|
Wired Setup | Configures the wired LAN settings. | |||
| IP Configuration | Configures network settings. | ||
|
| DHCP ON | Enables DHCP. | |
|
| DHCP OFF | Disables DHCP. | |
|
|
| IP Address | Configures the IP address when DHCP is disabled. |
|
|
| Subnet Mask | Configures the subnet mask when DHCP is disabled. |
|
|
| Default | Configures the default gateway when DHCP is disabled. |
|
|
| Gateway | |
|
|
|
| |
| DNS Server Address | Configures the DNS server address. | ||
Other Setup | Configures other network settings. | |||
|
|
|
| Set whether to or not to use Crestron |
| Crestron | If you choose Disable, the Logon window of Projector Web | ||
| Control will be displayed at first, but the selection window | |||
|
|
|
| |
|
|
|
| will not appear. |
Click the [Apply] button to save the settings.
NOTE • The new configuration settings are activated after restarting the network connection. When the configuration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu (&41).
•If you connect the projector to an existing network, consult a network administrator before setting server addresses.
•The WEP Key, WPA passphrase and SSID settings will not be set if the invalid characters are used.
•The projector does not allow both wireless and wired LAN to be connected to the same network. Do not set the same network address for both wireless and wired LAN.
21
