DUKANE | - 2 - | Application Note |
| ||
Intelligent Assembly Solutions | AN200 | |
|
| Rev 01 |
1
System Input Connector
The System In interface connector is one of the primary communications links between the DPC II / II+ input port and the user automation equipment. This connector provides the automation with dedicated communication lines that allow the automation to control the beginning and the end of a welding sequence.
|
|
|
|
|
|
|
|
|
|
|
|
| Pin Number |
|
| DPC Signal Name |
|
| DPC Signal Type |
|
|
| 1 |
|
| Power Supply |
| +22 VDC (250 mA max) |
| |||
| 2 |
|
| Ground |
| 22VDC Return |
| |||
| 3 |
|
| Isolated Operate Input |
| Input |
| |||
| 4 |
|
| Isolated Input Common 1 |
| Common for pin 3, 5, 9 |
| |||
| 5 |
|
| Isolated Press Control 2 |
| Input |
| |||
| 6 |
|
| Not Used |
| Not Used |
| |||
| 7 |
|
| Ground |
| +22VDC Return |
| |||
| 8 |
|
| Non Isolated Operate |
| Input |
| |||
| 9 |
|
| Isolated Automation Stop / |
| Input |
| |||
|
|
|
|
| Automation End of Weld 3 |
|
|
|
| |
| 10 |
|
| Not Used |
| Not Used |
| |||
| 11 |
|
| Hand Probe Press Inhibit |
| Input |
| |||
| 12 |
|
| MPC Probe/Setup Bit 0 4 |
| Input |
| |||
| 13 |
|
| MPC Probe/Setup Bit 1 4 |
| Input |
| |||
| 14 |
|
| MPC Probe/Setup Bit 2 4 |
| Input |
| |||
| 15 |
|
| Front Panel Control Lock |
| Input |
| |||
|
|
|
|
|
|
|
|
|
|
|
Notes:
1.SH707 on the
2.This input requires the optional
3.This input is configured for use as Automation End of Weld at the factory. Jumper SH704 must be reconfigured on the
4.The MPC probe bit functionality requires the optional MPC feature. The Setup bit functionality is available on all DPC II+ systems. Please refer to the DPC manual for further details on this feature.
Dukane Corporation
2900 Dukane Drive Saint Charles, IL 60174 USA
Phone (630)
http://www.dukane.com/us2
© Dukane Corporation 2003. All rights reserved.
